Abstract:<p>Strain gauge balances are main force measuring instruments used in high speed wind tunnels. As one of main performance of the strain gauge balance, accuracy plays a vital role in wind-tunnel test technologies. However, spatial temperature gradients across the strain gauge balance caused by the inner deformation of the balance due to temperature changes of the actual airflow environment, has some adverse influence upon the measurement accuracy of the strain gauge balance, especially for the long-duration testing in continuous wind tunnels. In order to better understand the temperature characteristics of strain gauge balances and improve their measurement accuracy, a study has been performed with the balance 30G and calibration model GBM-04A in the 0.6 m×0.6 m continuous transonic wind tunnel at China Aerodynamics Research & Development Center (CARDC), and a correction method for the bridge zero drifts of the strain gauge balance due to temperature gradients across the strain gauge balance for long-duration testing was developed. The study case shows that the deviation of measurement accuracy due to the non-uniform temperature gradient across the strain gauge balance body is about 0.0003 for the drag coefficient at <span class="math"><math>M=0.6</math></span> on the calibration model GBM-04A, which can be corrected in a large extent with the method in this paper. In some extent, the correction method can be of great benefit to those long-duration tests in the continuous wind tunnel for its simple operation and high universality.</p>

Research and Improvement on the Homemade Paper Basis Weight Instrument's Temperature Disturbance

On-line measurement of ash content in paper

Multiresolution analysis and estimation of the basis weight signal in papermaking processes

A New Sensor for Paper Basis-Weight and Ash-Content Measurements

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

Study and Countermeasure on Side Effects from Principal Stress Axis Rotation Experiment with Hollow Cylinder Apparatus

Paper Basis Weight Signal Processing Based on Butterworth Filter

Estimation and Modeling of Cross-Directional Basis Weight on Paper Machines Using Multiresolution Analysis

Research on Pressure Measurement Model Using Surface Wave Considering Temperature Effect

Exploration on experimental improvement of measuring saturated vapor pressure of liquids

Research on the Influence of Air Pressure to High Accuracy Mass Measurement

STATISTICAL-REGRESSION-BASED QUALITY INFERENCE METHODS

Degradation of handmade paper: exploration of water adsorption behavior and estimation of lifespan based on time-temperature-humidity superposition

The Alteration on the Precipitation Teaching Experiment Device

The Design and Realization of an Instrument of Monitoring the Temperature and Moisture

Basis Weight and Moisture Prediction Control System Based on Kalman Prediction Filter

Effects on Quartz Membrane Weighing from Ambient Humidity

Study on temperature characteristics and correction of strain gauge balance in actual airflow environment

A Method for Improving Temperature Measurement Accuracy on an Infrared Thermometer for the Ambient Temperature Field.

Design for Experimental Teaching of Measurement of Handmade Paper Brightness

Research on Testing Errors of Image Measuring Instrument