Abstract:Concrete-filled steel tube (CFST) arch bridges have a high center of gravity and a substantial mass, resulting in a discernible seismic response. Consequently, long-span CFST arch bridges must retain exceptional seismic performance and appropriate seismic control design. In this study, the dynamic response and seismic performance of a unique swallow-type CFST arch bridge when subjected to longitudinal earthquake forces were analyzed using numerical simulation methods. The displacement and axial force response results and their laws of the key bridge components were obtained. Taking into account seismic checking calculations, two damping measures were proposed for the CFST arch bridge, as the relative displacement of the girder end exceeded the allowable value specified. The appropriate design parameters for viscous dampers and lead shear dampers were examined. Additionally, the seismic performance of these dampers was verified through a shaking table test using a 1:16 scale model. The findings indicated that when subjected to Wenchuan Wolong wave action, the relative displacement between the steel box girder and the concrete girder of the bridge was significantly larger, leading to girder end pounding. The limit values were surpassed by 32.5% and 50%, when subjected to the uniform and traveling wave excitations, respectively, thus indicating that the expansion joint was the most vulnerable component. Following the selection of optimal parameters for the dampers, the dampers exhibited the capability to mitigate seismic and pounding impacts. Long-span CFST arch bridges with dampers were found to effectively reduce the seismic response of the skewback strain and vault, as well as the relative displacement of the girder ends. Furthermore, the average maximum damping rates achieved by the viscous damper and the lead shear damper reached 44.9% and 44.6%, respectively.

Shaking table test of steel frame structure with particle tuned mass damper

Shaking Table Investigations on the Seismic Performance of a Steel Frame with Optimized Passive Energy Dissipation Devices

Shaking table tests for structures with viscous dampers considering SSI effect

Shaking Table Model Test And Fe Analysis Of A Reinforced Concrete Mega- Frame Structure With Tuned Mass Dampers

Experimental study of seismic response reduction effects of particle damper using substructure shake table testing method

Shaking table test study of a RC frame with viscous damper

Seismic control of super high‐rise structures with double‐layer tuned particle damper

Comparative Studies on Structures with a Tuned Mass Damper and a Particle Damper

Shaking table test of damping ratio of strengthening-adding-story isolation structures

Shaking table test and seismic behaviour evaluation of viscous damping wall with amplification mechanism

Shaking table test and numerical simulation of the vibration control performance of a tuned mass damper on a transmission tower

Experimental Study of the Semi‐active Control of Building Structures Using the Shaking Table

Shaking table test study on the seismic control of concrete-filled steel tube arch bridges based on dampers

The Shaking Table Test of Viscoelastic Structure

Shaking table tests of electromagnetic mass damper system for control of structural seismic response

Shaking Table Model Test of Long-span Continuous Girder Bridge with Longitudinal Seismic Energy Dissipating

Shake Table Test on a Long-Span Cable-Stayed Bridge with Viscous Dampers Considering Wave Passage Effects

Seismic performance assessment of steel strip dampers equipped in high-rise steel frame

Design Method of Viscous Dampers in Shaking Table Model Test

Seismic performance assessment of eccentrically braced steel frame using demountable-metallic-corrugated-shear-panel dampers

Analysis of damping performance of frame structure with viscoelastic dampers