Abstract:The inherent nonlinearity of the pendulum motion becomes increasingly pronounced as excitation amplitudes rise, leading to the uncertainty of vibration and the loss of predictive accuracy owing to the linear assumption. To address this concern, this study introduces the pendulum tuned mass damper (PTMD) with hysteretic damping (HD) to realize the nonlinear performance oriented optimal seismic design. The primary contribution of this study is introducing the nonlinear performance of the PTMD with HD, thereby proposing amplitude robustness optimization based on nonlinear dynamic performance. Theoretical configurations of PTMD that facilitate different types of damping, including viscous damping (VD), constant damping, and hysteretic damping (HD), are compared. The Krylov-Bogoliubov (K-B) method is originally adopted to analyze the nonlinear effect of the PTMDs in the case of forced oscillation and free vibration. The nonlinear frequency response functions (FRFs) of the structure-PTMD system are derived, and the coupled systems are evaluated. The presence of stiffness softening, the persistence of stable solutions, and the occurrence of unstable frequency response loops demonstrate the inherent nonlinearity and sensitivity of control effectiveness. Attenuation characteristics of the PTMDs are obtained to determine the damping dissipation properties with accuracy compared with the dynamic solutions. Prue HD shows a similar dynamic interaction with an exponential decay in damping dissipation as the VD, which exhibits the linear damping performance for the coupled control system. A nonlinear performance oriented optimal seismic design based on the amplitude robustness index is proposed to consider the amplitude uncertainty impact on the structure-PTMD system. A case study is assessed based on the 20-story benchmark structure to investigate the functionality of the proposed optimization for the PTMD with HD. The results confirm the effectiveness of optimization from the perspective of FRFs, where the optimal PTMD with HD exhibited an FRF with a lower peak in structural amplitude compared to the optimal PTMD with VD. Seismic validations of the spectral analysis and specific earthquake evaluations verify the applicability of the proposed optimization for PTMD with HD, enabling an enlarged damping dissipation capacity as earthquake excitation increases to provide better structural protection.

Seismic control of super high‐rise structures with double‐layer tuned particle damper

A Double-Tuned Pendulum Mass Damper Employing a Pounding Damping Mechanism for Vibration Control of High-Rise Structures

Experimental study of seismic response reduction effects of particle damper using substructure shake table testing method

Optimizing Seismic Performance of Tuned Mass Dampers at Various Levels in Reinforced Concrete Buildings

Multiperformance optimization design of a hybrid vibration mitigation system for super high‐rise buildings to improve earthquake resistance

Analysis and optimization of seismic performance of high-rise residential building

Seismic optimization of pendulum tuned mass damper with hysteretic damping

Seismic analysis for tall and irregular temple buildings: A case study of strong nonlinear viscoelastic dampers

Control effect of large tuned mass damper used for seismic retrofitting of existing high‐rise building

Real-Time Hybrid Simulation of Multi-Story Structures Installed with Tuned Liquid Damper

Shaking Table Investigations on the Seismic Performance of a Steel Frame with Optimized Passive Energy Dissipation Devices

Evaluation of the seismic performance of structures equipped with novel multi-level TADAS dampers

Utilizing tuned mass damper for reduction of seismic pounding between two adjacent buildings with different dynamic characteristics

Shake table tests and numerical investigation of a resilient damping device for seismic response control of building structures

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Seismic performance of building structures based on improved viscous damper seismic design

Seismic Performances of a Structure Equipped with a Large Mass Ratio Multiple Tuned Mass Damper

Seismic control of tall buildings using vertically distributed multiple tuned mass dampers

Seismic performance design of energy-dissipated structure system based on damage control and time-varying damping ratio

Theoretical analysis and experimental validation of multi‐level friction damping system

Pounding tuned mass damper with constrained layer damping