Abstract:Today, population growth and the need for constructing adjacent buildings have raised the likelihood of pounding between adjacent buildings with different dynamic characteristics. The pounding force applied to adjacent buildings during an earthquake is intensive and may cause total or partial damage to structural elements, leading to collapse. It disturbs and complicates the functioning of buildings during and after an earthquake. Therefore, the main aim of this paper is to minimize and, if possible, eliminate the pounding force between two adjacent structures by considering three objective functions. For this aim, the tuned mass damper is utilized here. Also, this paper aims to reduce the number of collisions between different stories of adjacent buildings through a tuned mass damper system. For this purpose, two adjacent steel moment frames with six and ten stories are nonlinearly modeled and validated using the concentrated plasticity model in OpenSees. Moreover, the pounding element is nonlinearly modeled and validated. Then, tuned mass dampers (TMDs) are used on the roofs of the structures. They are optimized in stiffness, mass, and damping coefficient using the grey wolf optimization (GWO) algorithm. Nonlinear time history analysis (NLTHA) is performed under nine far- and near-field earthquakes. The pounding force and structural responses are analyzed, including maximum story acceleration, maximum inter-story drift, and base shear in the TMD-controlled and uncontrolled adjacent buildings. Finally, the Park-Ang damage index is evaluated for the structures with and without the TMD system. It has been found that the maximum pounding force, the maximum acceleration of the stories, the base shear, the drift ratio, and the number of collisions significantly reduce (or omit) in the presence of TMDs when the objective function is considered to be the minimization of the maximum pounding force. It is shown that the maximum pounding force generally declines to zero for this objective function.

Real-Time Hybrid Simulation of Multi-Story Structures Installed with Tuned Liquid Damper

Real-Time Hybrid Simulation of Full-Scale Tuned Liquid Column Dampers to Control Multi-Order Modal Responses of Structures

Investigating Large-Scale Tuned Liquid Dampers through Real-Time Hybrid Simulations

Real-Time Hybrid Simulation of the Size Effect of Tuned Liquid Dampers

Effects of tuned liquid dampers on the nonlinear seismic responses of high-rise structures using real-time hybrid simulations

Seismic Performance of Tuned Liquid Column Dampers for Structural Control Using Real-Time Hybrid Simulation

Multilayer Toroidal Tuned Liquid Column Dampers for Seismic Vibration Control of Structures

Seismic response control of tall building using semi-active tuned mass damper considering soil-structure interaction

Semi-Active Control of Randomly Wind-Excited Tall Building Structures Using Mr-Tlcds

Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures

Seismic control of tall buildings using vertically distributed multiple tuned mass dampers

Stochastic Optimal Control of Wind-Excited Tall Buildings Using Semi-Active Mr-Tlcds

Development and verification of real‐time hybrid simulation with deep learning‐based nonlinear numerical substructure

Understanding and exploiting the nonlinear behavior of tuned liquid dampers (TLDs) for structural vibration control by means of a nonlinear reduced-order model (ROM)

Large-Scale Real-Time Hybrid Simulation for Evaluation of Advanced Damping System Performance

Seismic control of super high‐rise structures with double‐layer tuned particle damper

Optimal Design Formula for Tuned Mass Damper Based on an Analytical Solution of Interaction between Soil and Structure with Rigid Foundation Subjected to Plane SH-Waves

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Development and validation of a nonlinear dynamic model for tuned liquid multiple columns dampers

Utilizing tuned mass damper for reduction of seismic pounding between two adjacent buildings with different dynamic characteristics

Distributed TLDs in RC Floors and Their Vibration Reduction Efficiency