Abstract:In order to investigate the failure modes and seismic behavior of the connections composed of concrete-filled square steel tubular columns and steel-concrete composite beams,three connection specimen with interior diaphragms,two connection specimens with exterior diaphragms and one connection specimen with anchored studs were tested under cyclic loading.Based on the experimental results,the shear performance of the concrete-filled square steel tubular column connections was analyzed.The shear capacity of the connections was divided into three parts: the contribution of steel tube webs,the contribution of steel tube flanges and interior/exterior diaphragms and the contribution of the concrete core,and as a result the shear force-deformation model of each part was proposed.By adding these three models together in condition of consistent shear deformation,the shear force-deformation skeleton curves can be obtained.Subsequently, the unloading curves and reloading curves were proposed by a simplified method, and the restoring force model was established.The results calculated by the theoretical model and the available experimental data from different researches were compared,and the conclusion can be drawn that in general the theoretical results show good agreement with those of the tests,while on the aspects of reloading stiffness and energy dissipation capacity there are some differences.Although it is different between theoretical models and experimental results on some aspects,the calculation method can be referenced in future researches.Based on the shear force-deformation restoring force model,the calculation formulae of the yield and ultimate shear capacity of the connections were established,which can be used in the engineering applications.

EXPERIMENTAL STUDY OF SHEAR BEHAVIOR OF COMPOSITE COLUMN SPECIMENS WITH OPENINGS ON STEEL TUBE WALL

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Shear Behavior of Exposed Steel Column Base Joint

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

Experimental study on axial compressive behavior of composite column specimens with openings on steel tube wall

Experimental study on connections of RC beam-composite column with openings on steel tube

Experimental investigation of concrete-filled steel tubular columns with reinforcing lattice angle

RESEARCH ON LOCAL BUCKLING OF DODECAGONAL SECTION DOUBLE SKINNED CONCRETE-FILLED STEEL TUBE SHORT COLUMN

Experimental study on axial compressive strength of concrete filled composite steel tube short columns

Experimental Study on Shear Capacity of Concrete-Filled Steel Tube Stub Columns Subject to Compressive and Bending Forces

Experimental investigation of thin-walled concrete-filled steel tube columns with reinforced lattice angle

Shear strength tests of concrete filled steel tube columns

Experimental study on seismic behavior of steel tube-reinforced concrete composite shear walls with high axial compressive load ratio

Compressive Tests of Thin-Walled Circle Concrete-Filled Steel Tubes

Experiment study of reinforced concrete filled steel tubular columns subjected to axial compression

Experimental Study and Theoretical Analyses on Compressive Bearing Capacity of High Strength Concrete-Filled Steel Tube Composite Columns

Research on Shear Performance of Concrete-Filled Square Steel Tubular Column Connections

Experimental Research and Numerical Analysis on the Concrete-Filled Square CFRP Steel Tube Column Under Compressive-Shear Loading

Experimental Study on Seismic Behavior of High-Strength Concrete-Filled Steel Tube Composite Columns

Tests and Numerical Simulation on Short Composite-Sectioned Concrete Filled Steel Tubular Columns Subjected to Axial Compressive Loading

Research on basic behavior of high-strength concrete-filled steel tubular short columns under axial compressive loading