Abstract:Concrete-encased concrete-filled double-skin steel tubular (CFDST) stub columns serve as structural members, encompassing an exterior reinforced concrete (RC) component alongside an internal CFDST component. In this paper, the eccentric compressive behavior of such stub columns was investigated. To this end, specimens with varying diameter-to-width ratios d o / w and eccentricity ratios e / w were examined; their failure process, failure modes, strain distributions, and representative mechanical performance were recorded and analyzed. Based on the experimental results, the specimens' failure process transitions through four stages: elastic, elastic-plastic, descending, and stabilizing. With d o / w escalating from 0.5 to 0.7, the eccentric compressive strength, flexural stiffness , and displacement ductility index improved by 16.1%, 15.2%, and 37.2%, respectively. Subsequently, a detailed finite element model (FEM) was established to analyze the eccentric performance of the concrete-encased CFDST stub columns. Following the FEM reliability validation, the working characteristics of such stub columns in the balanced failure mode were elucidated. The full-range analyses were carried out under failure modes controlled by compression and tension to unveil the loading distribution mechanisms. Moreover, the impacts of parameters like concrete compressive strength, diameter-to-width ratio, and steel tube yield strength on the N u – M u relation curves were quantified, ascertaining the key influencing factors. Finally, a formula was suggested to predict the corresponding eccentric compressive strength. Following the superposition principle and limit equilibrium theory, the simplified design equations put forth yielded satisfactory predictions based on the experimental and numerical results.

Experimental Study on Shear Capacity of Concrete-Filled Steel Tube Stub Columns Subject to Compressive and Bending Forces

Analytical Study of Circular Concrete-Filled Steel Tube Stub Columns under Axial Compression

STUDY OF BEARING CAPACITY AND COMPLETE STRESS-STAIN CURVES FOR CONCRETE FILLED SQUARE STEEL TUBE COLUMNS

Shear Behavior Of Steel Tube Confined Concrete Columns Subjected To Compressive And Bending Forces

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Compressive Tests of Thin-Walled Circle Concrete-Filled Steel Tubes

Shear strength tests of concrete filled steel tube columns

Experimental investigation of self-compacting concrete-filled weather steel tube stub columns

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Experimental investigation of concrete-filled steel tubular columns with reinforcing lattice angle

Experimental Investigation of Thin-Walled Complex Section Concrete-Filled Steel Stub Columns

Experimental Research and Numerical Analysis on the Concrete-Filled Square CFRP Steel Tube Column Under Compressive-Shear Loading

Experimental and numerical investigation of square concrete-filled double-skin steel stiffened tubular stub columns with CHS inner tubes under axial compression

Experimental Behaviour of Concrete-Filled Steel Tubular Members under Lateral Shear Loads

Axial Loading Behaviour of Self-Compacting Concrete-Filled Thin-Walled Steel Tubular Stub Columns

Experimental Study and Theoretical Analyses on Compressive Bearing Capacity of High Strength Concrete-Filled Steel Tube Composite Columns

Performance of Special-Shaped Concrete-Filled Square Steel Tube Column under Axial Compression

Research for the behaviour of self-consolidating concrete filled steel tubes subjected to axial compression

Experimental and numerical study of stirrup‐confined concrete‐filled L‐shaped steel tube stub column under axial compression

Eccentric compressive behavior of square concrete-encased concrete-filled double-skin steel tubular stub columns

Behaviour of Concrete-Filled Steel Tubular Stub Columns Subjected to Axially Local Compression