Abstract:The release of potentially toxic metal ions from corrosion scales formed on pipe surfaces is of great concern for water quality in drinking water distribution systems (DWDS). This study examined the effects of alkalinity, chloride, and sulfate on metal release from corrosion scales sampled from a corroded iron pipe. Jar tests and recirculation pipe systems were used to investigate the metal-release potential during stagnant and active flow conditions. The experimental data show that both the ambient water chemistry and hydraulic conditions exerted complex influences on metal release from the exposed corrosion scales. Fe, Mn, and Ni were more labile to be released during a 132-h period of stagnation, while the release of Al, Zn, and Cu was an order of magnitude higher under flow conditions compared to stagnant conditions. Increasing concentrations of chloride (from 5 mg/L to 60 mg/L) and sulfate (from 20 mg/L to 100 mg/L) resulted in the increased release of Fe, Al, and Zn, especially under active flow conditions. This effect could be effectively mitigated by increasing alkalinity from 50 mg/L to 200 mg/L as CaCO3. While increasing alkalinity suppressed the release of Fe and stimulated the release of Al and Cu under stagnant conditions, this contradictory effect was not observed under active flow conditions. (C) 2020 Elsevier Ltd. All rights reserved.

Analysis on Chemical Stability of Metal Ion in Water Distribution System

Effects of Major Anions on Iron Release in Drinking Water Supply System

Chlorine Decay and Trihalomethanes Formation in Water Distribution System

Effects of Chloride and Humic Acid on Iron Release in Water Distribution System

Progress in the Study of the Iron Stability Problem in Drinking Water Distribution System

Biological Stability in Drinking Water: A Regression Analysis of Influencing Factors

Analysis of Influence Factors and Control Methods on Iron Release Phenomenon in Drinking Water Distribution System

Analysis of water quality monitoring and iron stability in drinking water distribution system among water source switch

Control Effect of Regulating Ph and Alkalinity on Iron Release in Drinking Water Distribution System

Influence of Water Source Switching on Water Quality in Drinking Water Distribution System

[Effect on Iron Release in Drinking Water Distribution Systems].

Effects of chloride on corrosion scale compositions and heavy metal release in drinking water distribution systems

Metal-release Potential from Iron Corrosion Scales under Stagnant and Active Flow, and Varying Water Quality Conditions.

Formational Mechanism and Structural Composition of Aluminum-Containing Scales in Water Supply Pipes

Effect of Chloramine Residual on Iron Release in Drinking Water Distribution Systems

Study on Biological Stability of Water in Water Distribution System in a Northern City

[Analysis of the Characteristics of Corrosion Scale in Drinking Water Distribution Systems].

Effect of Sulphate Concentration Change on Iron Release in Drinking Water Distribution Systems

Stability of Drinking Water Distribution Systems and Control of Disinfection By-Products

ON AMORPHOUS Al(OH)3 IN DRINKING WATER SUPPLY NETWORKS

Influence of microbial community on iron release under stagnation condition in drinking water systems