Abstract:Using mineral powder, fly ash and cement as the basic three-component composite system, machine-made sand and gravel powder and expansion agent are introduced to prepare five-component composite grouting materials. The water-binder ratio, stone powder content, the water glass modulus, the alkali content, the water-cement ratio, and machine-made sand and gravel powder content were studied for the physical and mechanical properties of alkali-activated multi-component composite grouting materials. The law of influencing factors and the optimal parameters of each factor were determined according to fluidity, setting time, compressive strength, and drying shrinkage. The optimal values of water glass modulus and alkali content are 1.0 and 6%, respectively. Increasing the water-binder ratio significantly improves fluidity, but results in a substantial delay in setting time and a decrease in strength. Therefore, it is not advisable to exceed a water-binder ratio of 0.6. Furthermore, the stone powder content should not surpass 10%. The hydration process of alkali-activated materials mainly includes crystallization nucleation and growth, phase boundary reaction and diffusion. Three types of expansion agents, CaO, MgO and SC (the mixture of calcium sulfoaluminate and calcium oxide), were selected, and four levels of 0%, 4%, 8%, and 12% were set, including a total of 9 mix ratios besides the benchmark group. The effects of expansion agents on the fluidity setting time, compressive strength and volume stability of composite grouting materials were discussed. The addition of an expansion agent proves effective in reducing drying shrinkage, with the sequence of effectiveness as follows: CaO expansion agent > MgO expansion agent > SC expansion agent. The optimal content of CaO expansion agent is found to be 8%, leading to a remarkable reduction in 28 d shrinkage.

Study on performance and composition of ettringite type concrete expansion agent

Study on Expansive High Performance Concrete by Using Expansive Agent and Natural Anhydrous Gypsum

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

Effect of sodium sulfate and gypsum on performances of expansive grouting material with aluminum as expansion agent

The Experimental Research of Strength with Solidifying Agent on Clay

Study on the mechanical properties and hydration synergy of MEA and UEA modified ultrafine cement grouting materials

Experimental study on early shrinkage and later expansion of concrete under a simulated geothermal environment

Study On Long-Term Volume Stability And Microstructure Of Concrete Containing Magnesia Expansion Agent

Hydration and Expansion Properties of Shrinkage-Compensating Composite Cementitious Materials

Effect of Assembly Unit of Expansive Agents on the Mechanical Performance and Durability of Cement-Based Materials

Micro-Change Process of Calcium–Magnesium Double Expansive Agent and Its Performance Characterization in Cement-Based Materials

Mechanical properties and micro-structure analysis of concrete adding high performance composite cementious material

The Assessment of Expansion Performance of Expansive Agent in Composite Cementitious Materials and Its Mix Design

Experimental study on new variety of cement-stabilized soil

Influence of Clinker and SCMs on Soluble Chemicals and Expansion of Phosphogypsum-Based Cementitious Materials

Property of Water-Reducing and Crystallization on Superplasticize of the Concrete

Understanding the Shrinkage Compensating Ability of Type K Expansive Agent in Concrete

Experimental study on strength and abrasion-resistance enhancement admixture

Expansion Mechanism of C4A3$-CaSO4-CaO in Portland Cement Paste

Effect of MgO and gypsum content on long-term expansion of low heat Portland slag cement with slight expansion

Development and Evaluation of Physical and Mechanical Properties of Alkali-Activated Multi-Component Composite Grouting Materials