Abstract:Air conditioning ventilation ducts are widely used in contemporary buildings. The change of airflow direction in the ducts local components can easily lead to the deposition of particles, which can easily form a secondary source of indoor air pollution and have an adverse effect on human health. Based on this, this paper utilizes the existing experimental data to validate the numerical simulation. The Reynolds stress turbulence model combined with the method of enhanced wall function was used to investigate the deposition characteristics of fine particles in different local components. For the first time, local deposition rates and deposition hotspots were proposed to analyze the simulation results. The results show that the local deposition rate of the particles with a particle size of 1μm do not differ much on each wall surface, and the particles are deposited more uniformly on each wall at the local components, with a difference of less than 10 %, and the maximum local deposition rate is on the outer wall of the local components. When the particle size is larger than 10μm, the local deposition rate on the outer wall of the local component increases significantly, with a maximum increase of 23.3 % (compared to 5μm particles), and the maximum local deposition rate increases slowly with increasing air velocity, with a maximum increase of less than 8 %. The effect of increasing particle size on the maximum local deposition rate is much greater than the increase in air velocity. With the increase of air velocity and particle size, the deposition hotspots of both the 90° bend and the T-type tee duct migrate to the middle of the wall, and the deposition hotspots of the 4-way duct migrate to the inside of the wall.

Research on the Coagulation of Fine Particles in the Air -Conditioner Duct

Simulation of Particles Diffusion Characteristics in the Ventilation Duct of the Air Conditioning System

Study on the deposition characteristics of fine particles at local components in air conditioning ventilation ducts

Research on Stress Mechanism of Fine Particulate Matter in Air Duct

Distribution of non-spherical nanoparticles in turbulent flow of ventilation chamber considering fluctuating particle number density

Numerical analysis of particle deposition in ventilation duct

Effects of Finite-Size Heavy Particles on the Turbulent Flows in a Square Duct

Kinematic Characteristics and Thermophoretic Deposition of Inhalable Particles in Temperature Gradient Field

NUMERICAL SIMULATION OF ULTRAFINE PARTICLE-LADEN CYLINDER WAKE FLOW WITH COHERENT STRUCTURES

Size-Resolved Surface Deposition And Coagulation Of Indoor Particles

Effect of Fluctuating Aerosol Concentration on the Aerosol Distributions in a Turbulent Jet

Numerical Simulation on Flow Characteristics of PM2.5 in the Indoor Environment

Numerical study of coagulation and sedimentation of indoor suspended particles

ANALYSIS AND CALCULATION OF THE POLY-DISPERSE PARTICLES RESUSPENSION PROCESS IN A VENTILATION AND AIR-CONDITIONING SYSTEM

Numerical Study of the Effect of Ventilation Pattern on Coarse, Fine, and Very Fine Particulate Matter Removal in Partitioned Indoor Environment

Investigation into Coagulation of Fine Particles by Combination of Seed Particles with Acoustic Wave

Direct numerical simulation of kinematics and thermophoretic deposition of inhalable particles in turbulent duct flows

Modeling of Ultrafine Particle Dispersion in Indoor Environments with an Improved Drift Flux Model

Kinematic Characteristics and Thermophoretic Deposition of Inhalable Particles in Turbulent Duct Flow

The mechanism of low-speed steady substitution flow to clean the indoor particulate matter

Simulation Research on Particulate Matter Filtration of a HVAC Vehicle