Abstract:When contaminants are released naturally or deliberately in ventilation ducts, they can contaminate the supply air and rooms through the return air recirculation of the ventilation and air conditioning system. Few studies have considered the impact of contaminant transport through air recirculation on the non-uniform indoor contaminant distribution. In this study, a method for calculating the steady-state contaminant distribution in a ventilation system with air recirculation when there is a contaminant release from the ventilation duct is presented. The ventilation ducts are considered as a virtual room and modelled separately from the rooms, both using linear superposition expressions based on accessibility indicators to obtain a relationship between contaminant concentrations at the outlet and inlet. A total of four sub-methods are proposed considering different treatments for the return and supply air ducts connected to each air handling unit (AHU). The proposed methods (Methods 1–3) considering the non-uniform characteristics of the ducts are shown to have an accuracy comparable to that of CFD (computational fluid dynamics) simulations, with an average prediction deviation of less than 5%, whereas the use of well-mixed assumption in the ducts (Method 4) results in an average prediction deviation of up to 45% in one of the rooms when the contaminant source is close to the diversion position of the supply air duct. The proposed method avoids the need for holistic modelling and iterative simulation of complex ventilation and air-conditioning system and multiple rooms, and allows for rapid prediction of contaminant distribution

ANALYSIS AND CALCULATION OF THE POLY-DISPERSE PARTICLES RESUSPENSION PROCESS IN A VENTILATION AND AIR-CONDITIONING SYSTEM

How Particle Resuspension from Inner Surfaces of Ventilation Ducts Affects Indoor Air Quality-A Modeling Analysis

Characterization of Electrohydrodynamic Flow in a Plate-Plate Electrostatic Precipitator with a Wire-Cylinder Pre-Charger by Data-Driven Vortex and Residence Time Analysis

Numerical analysis of particle deposition in ventilation duct

Particulate Pollution in Ventilated Space: Analysis of Influencing Factors.

A Particle Resuspension Model in Ventilation Ducts

Modeling particle fate in ventilation system—Part I: Model development

Effect of particle resuspension from ventilation duct on indoor environment

Analysis of Factors Influencing Indoor Particle Concentration Using the Lumped Parameter Model

An Experimental Study on Short-Time Particle Resuspension from Inner Surfaces of Straight Ventilation Ducts

Numerical Study of the Effect of Ventilation Pattern on Coarse, Fine, and Very Fine Particulate Matter Removal in Partitioned Indoor Environment

A Numerical Method to Determine the Steady State Distribution of Passive Contaminant in Generic Ventilation Systems.

The mechanism of low-speed steady substitution flow to clean the indoor particulate matter

Modeling Particle Dispersion in Personalized Ventilated Room

Study on particle deposition in ventilation ducts

PROBE-PM: A new way to simulate particle transport in ventilation systems

Particle Deposition in Indoor Environments: Analysis of Influencing Factors.

Prediction of the temporal evolution of microparticle resuspension in ventilated duct during a fan start by a Monte Carlo model

Algorithm for steady contaminant distribution in ventilation systems with air recirculation: Contaminant release in ventilation ducts

Numerical Study Of Particle Deposition In Two Differently Ventilated Rooms

Modeling of Ultrafine Particle Dispersion in Indoor Environments with an Improved Drift Flux Model