Abstract:Particle dispersion and deposition in man-made enclosed environments are closely related to the well-being of occupants. The present study developed a three-dimensional drift-flux model for particle movements in turbulent indoor airflows, and combined it into Eulerian approaches. To account for the process of particle deposition at solid boundaries, a semi-empirical deposition model was adopted in which the size-dependent deposition characteristics were well resolved. After validation against the experimental data in a scaled isothermal chamber and in a full-scale non-isothermal environmental chamber, the drift-flux model was used to investigate the deposition rates and human exposures to particles from two different sources with three typical ventilation systems: mixing ventilation (MV), displacement ventilation (DV), and under-floor air distribution (UFAD). For particles originating from the supply air, a V-shaped curve of the deposition velocity variation as a function of particle size was observed. The minimum deposition appeared at 0.1–0.5μm. For supermicron particles, the ventilation type and air exchange rate had an ignorable effect on the deposition rate. The movements of submicron particles were like tracer gases while the gravitational settling effect should be taken into account for particles larger than 2.5μm. The temporal increment of human exposure to a step-up particle release in the supply air was determined, among many factors, by the distance between the occupant and air outlet. The larger the particle size, the lower the human exposure. For particles released from an internal heat source, the concentration stratification of small particles (diameter <10μm) in the vertical direction appeared with DV and UFAD, and it was found the advantageous principle for gaseous pollutants that a relatively less-polluted occupied zone existed in DV and UFAD was also applicable to small particles.

Particle Deposition in Indoor Environments: Analysis of Influencing Factors.

Modeling particle dispersion and deposition in indoor environments

Numerical Study Of Particle Deposition In Two Differently Ventilated Rooms

Developing an Empirical Equation for Modeling Particle Deposition Velocity Onto Inclined Surfaces in Indoor Environments

Deposition of Non-Spherical Particles on Indoor Surfaces: Modification of Diffusion Coefficient

Effect of Particle Spatial Distribution on Particle Deposition in Ventilation Rooms

Particle dispersion and deposition in ventilated rooms: Testing and evaluation of different Eulerian and Lagrangian models

Deposition Rates on Smooth Surfaces and Coagulation of Aerosol Particles Inside a Test Chamber

Analysis of Factors Influencing Indoor Particle Concentration Using the Lumped Parameter Model

Particulate Pollution in Ventilated Space: Analysis of Influencing Factors.

MODELING HUMAN EXPOSURE TO PARTICLES IN INDOOR ENVIRONMENTS USING A DRIFT-FLUX MODEL

Modeling of Ultrafine Particle Dispersion in Indoor Environments with an Improved Drift Flux Model

Deposition of Indoor Airborne Particles onto Human Body Surfaces: A Modeling Analysis and Manikin-Based Experimental Study

Analytical Prediction Model for Indoor Particle Deposition Onto Ocular Surface

Size-Resolved Surface Deposition And Coagulation Of Indoor Particles

Quantitative Assessment of the Effect of Surface Deposition and Coagulation on the Dynamics of Submicrometer Particles Indoors

Analytical Prediction Model for Particle Deposition in Ventilation Ducts

Numerical analysis of particle deposition in ventilation duct

Numerical study of the fine particle deposition behaviors on three-dimensional random rough walls

Experimental research and modeling of particle deposition in ventilation ducts

How Particle Resuspension from Inner Surfaces of Ventilation Ducts Affects Indoor Air Quality-A Modeling Analysis