Abstract:Introduction Laser peen forming (LPF) is a forming technique using laser-induced plasma to impact the workpiece spot-by-spot and forming the metal sheet into a specified curvature. It is a complex physics process including laser ablation, shock wave propagation, material yielding and deformation accumulation. A high-intensity short-pulsed laser irradiates on the surface of the workpiece, as a result, high pressure plasma generates on the surface of the workpiece in the confinement of water. In the impact of high pressure plasma, the shock pressure generates and spreads to the depth direction. The amplitude of the shock wave arrives at 1-10 GPa and the time duration is around 100 nanoseconds, as a consequence LPF is a high-dynamic response process due to the laser shock process. When the shock wave exceeds the Von Mises stress of materials, the workpiece in the shock zone yields and generates plastic strain. After laser scanning over the workpiece surface, the deformation is accumulated with the expanding of the plastic zone, resulting in the workpiece bending into a small curvature convex shape. In order to overcome the difficulty of improving the pulse energy, laser-assisted laser peen forming(LALPF) was proposed by Hu et al. [1] to improve the bending capability. LALPF adapted CW laser heating to increase the deformation. Laser heating plays an assisted role in softening the material and altering the stress state of material during LALPF. Simutationly, the back surface of the workpiece is heating by continuous wave (CW) laser which is coaxial with the pulsed laser. The material absorbs the CW laser energy resulting in high temperature field in the local area. The local high temperature decreases the yield strength, inducing thermal stress even plastic thermal strain owing to the nonuniform expansion of material. Thus, lager and deeper plastic strain is generated in the laser shock process and the deformation of the workpiece increase compared with the LPF in room temperature.

Recent Progress in Laser Peen Forming of Large Scale Panel

Efficient eigenstrain model for laser peen forming of panels with stiffening rib

Numerical modelling of deformation prediction for laser-assisted laser peen forming

Investigation on the bending deformation of laser peen forming with a simplified eigenstrain-based finite element model

Laser forming of the panel with crossed reinforcing bars

Modeling of Stiffener Integral Panels with Eigenstrain for Laser Peen Forming and Analysis of Deformation Characteristic

Parameter Optimization for Laser Peen Forming on 6005A-T6 Aluminum Alloy Plates to Enhance the Constrained Deformation of Integral Stiffened Plates

Theoretical and Experimental Study on Laser Compound Forming of Plate

Laser Peen Forming Induced Two Way Bending of Thin Sheet Metals and Its Mechanisms

Analytical Modeling of Axis Geometry Effect in Laser Peen Forming

Three-dimensional numerical simulation and experimental study of sheet metal bending by laser peen forming

Visual Study on Surface Micro-Topography and Residual Stress of Sheet Metal after Pulsed Laser Peening

Analyses of Effects of Process Parameters on Laser Bending of Stiffened Panels

Application of laser peen forming to bend fibre metal laminates by high dynamic loading

Efficient Process Planning of Laser Peen Forming for Complex Shaping with Distributed Eigen-Moment

Non-Traditional Forming Process of Sheet Metal Based on Laser Shock Waves

Shape Prediction for Laser Peen Forming of Fiber Metal Laminates by Experimentally Determined Eigenstrain

Process-based Surface Flattening Method for Laser Peen Forming of Complex Geometry

Process Planning for Laser Peen Forming of Complex Geometry: an Analytical-Based Inverse Study

Stress wave propagation and forming mechanism of the stiffened plate by laser peening

Research on Bending Angels of Laser Peen Forming Without Confine Layer