The plastic flow mechanism and precise forming method of 7075 aluminum plate in laser shock forming

Yuqi Yang,Hongchao Qiao,Ying Lu,Jibin Zhao,Boyu Sun

DOI: https://doi.org/10.1016/j.optlastec.2023.109823

IF: 4.939

2023-12-01

Optics & Laser Technology

Abstract:Laser shock forming (LSF) is an advanced and flexible forming method that bend thin plate by inducing a high-strain-rate plastic deformation layer under laser shock wave. The forming method can be applied to the complex structure with grooves and stiffeners for the superiority of non-contact and free die. This paper analyzes the plastic flow mechanism of thin plates with different thicknesses under laser shock wave, and proposes an accurate forming strategy for complex shapes in laser shock forming. The indentations on 0.6 mm plates show a smooth upend hat shape after 2–10 J laser shock treatment, while the flat-bottomed indentations with bulges can be found on 3 mm plates shocked by 4–12 J laser beam. The difference in the 3D surface topography of the indentation comes from the plastic flow deformation of the thin plates under the shock wave and the relationship between the influence depth of the shock wave and plate thickness. When the influence depth of shock wave is greater than the plate thickness, the indentation shows a smooth upend hat shape without a bulge, and the plate is bent towards laser beam, and when the influence depth of the shock wave is less than the plate thickness, the indentation has a flat bottom and a circle of bulge, and the plate is bent away from laser beam. Based on the convex bending deformation in laser shock forming, this paper proposes an accurate forming method for complex shapes. The shock region and shock path are determined by the synthetic or main strain of in-plane strain and bending strain obtained from the inverse development of the target shape surface to the initial surface. Obtained from the development of 3D target geometry model to the initial shape, the required bending moment is applied to the test plate model as loads, and the laser parameters are determined by the coincidence of the geometry shape of test plate in experimental and simulation results. The forming efficiency of the process design strategy is verified by the experimental saddle- and cylinder-shaped plate conducted with the designed shock path and reasonable laser parameters.

optics,physics, applied