Abstract:Laser shock forming (LSF) is an advanced and flexible forming method that bend thin plate by inducing a high-strain-rate plastic deformation layer under laser shock wave. The forming method can be applied to the complex structure with grooves and stiffeners for the superiority of non-contact and free die. This paper analyzes the plastic flow mechanism of thin plates with different thicknesses under laser shock wave, and proposes an accurate forming strategy for complex shapes in laser shock forming. The indentations on 0.6 mm plates show a smooth upend hat shape after 2–10 J laser shock treatment, while the flat-bottomed indentations with bulges can be found on 3 mm plates shocked by 4–12 J laser beam. The difference in the 3D surface topography of the indentation comes from the plastic flow deformation of the thin plates under the shock wave and the relationship between the influence depth of the shock wave and plate thickness. When the influence depth of shock wave is greater than the plate thickness, the indentation shows a smooth upend hat shape without a bulge, and the plate is bent towards laser beam, and when the influence depth of the shock wave is less than the plate thickness, the indentation has a flat bottom and a circle of bulge, and the plate is bent away from laser beam. Based on the convex bending deformation in laser shock forming, this paper proposes an accurate forming method for complex shapes. The shock region and shock path are determined by the synthetic or main strain of in-plane strain and bending strain obtained from the inverse development of the target shape surface to the initial surface. Obtained from the development of 3D target geometry model to the initial shape, the required bending moment is applied to the test plate model as loads, and the laser parameters are determined by the coincidence of the geometry shape of test plate in experimental and simulation results. The forming efficiency of the process design strategy is verified by the experimental saddle- and cylinder-shaped plate conducted with the designed shock path and reasonable laser parameters.

Numerical and experimental investigation of laser shock microhydroforming technology for microforming thin-walled LA103Z alloy foil with complex microfeatures

Investigation of liquid medium concentration and pressure on formability in laser-activated high-speed hydraulic microforming

Numerical Simulation Research on Laser Shock Forming of Thin Metal Sheet

Laser shock micro-bulk forming: Numerical simulation and experimental research

Fittability and mechanical properties of laser shock liquid warm microforming of AZ31B magnesium alloy foils with complex features

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upsetting

Experimental Investigation on Laser Shock Micro Hydraulic Bulging of Copper Foil

Laser shock micro-sheet bulk metal forming: numerical simulation and experimental validation

Numerical Simulation Research on Laser Shock Forming

Investigation on formability and mechanism in laser shock hydraulic warm free-bulging of AZ31B magnesium alloy foils

Research on warm laser shock sheet micro-forging

Experiment and Simulation Study of the Laser-Induced Cavitation Bubble Technique for Forming a Microgroove in Aluminum Foil

Reducing the Rebound Effect in Microscale Laser Dynamic Forming through Multi-Pulse Laser Shock Loading

Deformation Behaviors and Critical Parameters in Microscale Laser Dynamic Forming

Crystal plasticity–based finite element modeling and experimental study for high strain rate microscale laser shock clinching of copper foil

Microstructure and Mechanical Property Characterizations of Metal Foil after Microscale Laser Dynamic Forming

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

The plastic flow mechanism and precise forming method of 7075 aluminum plate in laser shock forming

Study of the Novel Technique of Laser Shocking Fine Partial Forming of Metal Sheet

A study on super-speed forming of metal sheet by laser shock waves