Design of an innovative laser-assisted four-point bending forming process for high-stiffened structure of aluminum alloy

Jun Guo,Weidong Li,Min Wan,Yue Zhao,Cailing Li

DOI: https://doi.org/10.1016/j.optlastec.2021.107313

2021-11-01

Abstract:<p>High-stiffened structures of aluminum alloy are commonly used on modern aircrafts to meet the requirements of light weight and high stiffness. In this study, the combination of the laser scanning and four-point bending called laser-assisted four-point bending (LAFPB) was proposed to form the high-stiffened structures of aluminum alloy to the product quality. With the analytical model, simulation and experimental bending results, the forming characteristics of LAFPB were investigated. The main results show that the increase of the plastic strain was originated from the elastic strain of the laser scanned area and the "bullying effect" of the adjacent areas which brought about by the mechanical balance reconstruction. In the laser-assisted four-point bending, the initial elastic strain energy inside the part is converted into plastic strain energy under the action of the laser, the plastic strain energy of the workpiece increased by about 250%. It is proved by simulation and experiment that LAFPB can reduce the mechanical force and springback at the same deformation compared with traditional press bending which make a foundation for improving forming quality of high-stiffened structure parts.</p>

optics,physics, applied