Abstract:Fibre metal laminates are new sorts of composite materials with superior fatigue and impact properties. Forming parts from FMLs is very attractive to reduce the process cycle and labor cost. Laser peen forming(LPF) is a promising method to form FMLs with its design flexibility and adaptability to produce complex shapes. To predict the deformed shape of FMLs after laser peen forming, eigenstrain-based modelling is a helpful method with advantage in spending less computational time, but it is difficult to precisely determine eigenstrain distribution regarding material with layered structure. In the present research, an efficient and effective experiment-based method is proposed to determine eigenstrain in the metal layer of FMLs, which can avoid the complicated numerical simulation. The determined eigenstrain is assumed to be uniformly distributed in each metal layer while no plastic deformation is generated in composite layer due to its high strength yield. An analytical model is developed to relate the bending deformation to eigenstrain field. Firstly, the equivalent external bending moment applied on the samples is deduced from eigenstrain, and then the relation of deformation and bending moment is provided by a beam bending model. Chemical etching is utilized to remove metal layer by layer to calculate eigenstrain in each layer. With removal of each metal layer, the bending profiles will spring back or bend further due to change of applied moment and bending stiffness. The eigenstrain in each layer can be inversely determined by matching the residual bending profile after each etching with the developed bending model. One scanning strategy of LPF with reciprocating line and 50% overlapping rate is performed in experiments to apply laser shocks on the entire top surface of strip samples, which are prepared from glass laminate aluminum reinforced epoxy with a unidirectional orientation. Eigenstrain in the top and bottom metal layer is successively determined by the proposed analytical model and chemical etching. Finite element analysis is utilized to verify the determined eigenstrain by comparing the simulated shape with experiments and good agreement is obtained.

Multi-scale finite element analysis of laser-assisted forming of CF/PEEK composite corner structures

Influence of Process Parameters on the Interlaminar Shear Strength of CF/PEEK Composites In-Situ Consolidated by Laser-Assisted Automated Fiber Placement

Three-dimensional numerical simulation and experimental study of sheet metal bending by laser peen forming

Research on the Mechanisms of Laser Forming for the Micro-Structural Element

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Investigation on the bending deformation of laser peen forming with a simplified eigenstrain-based finite element model

Effect of Elastic Prestress on the Laser Peen Forming of Aluminum Alloy 2024-T351: Experiments and Eigenstrain-Based Modeling

Numerical modelling of deformation prediction for laser-assisted laser peen forming

Modeling and Reducing Edge Effects in Laser Bending

Investigation of the spring-back phenomenon in two-dimensional bending of continuous glass fiber-reinforced polyamide composite sheets

Bi-scale Interfacial Bond Behaviors of CCF/PEEK Composites by Plasma-Laser Cooperatively Assisted 3D Printing Process

Design of an innovative laser-assisted four-point bending forming process for high-stiffened structure of aluminum alloy

Application of laser peen forming to bend fibre metal laminates by high dynamic loading

Interlayer bonding improvement of PEEK and CF-PEEK composites with laser-assisted fused deposition modeling

Numerical And Experimental Investigation Of Deformation Field During Laser Forming Of Metal Sheet

An Experiment-Based Model to Determine Eigenstrain in Fibre Metal Laminates Induced by Laser Peen Forming

Design and manufacture of mould-free fibre-reinforced laminates with compound curvature

Modeling of Stiffener Integral Panels with Eigenstrain for Laser Peen Forming and Analysis of Deformation Characteristic

Parameter Optimization for Laser Peen Forming on 6005A-T6 Aluminum Alloy Plates to Enhance the Constrained Deformation of Integral Stiffened Plates

Structure Design on Thermoplastic Composites Considering Forming Effects

Efficient eigenstrain model for laser peen forming of panels with stiffening rib