Abstract:The investigation of laser peen forming for 6005A-T6 aluminum alloy stiffened plates was conducted through a combination of numerical simulation and experimental research. The simulation explored the propagation characteristics of stress waves in different regions of the stiffened structure, while the experimental analysis focused on the coordination effect of elastic-plastic deformation along the forming path. An equivalent strain model was employed to describe the wing plate surface in the simulation experiment. The results revealed that surface and reflected stress waves were generated within the stiffened structure, with stress superposition effects occurring inside the web plate. These phenomena proved advantageous for mitigating adverse effects caused by reflected stress waves during the forming process. Experimental findings validated the accuracy of residual stress distribution obtained from simulations. Moreover, it was observed that due to constraint exerted by stiffened structures on stress propagation, there was a reduction of 25.9 % in spherical deformation coefficient compared to flat plates for stiffened sheets. Prime novelty statement The stress formation law of stiffened plates under laser peen forming is conducted. Simulation explores the propagation characteristics of stress waves in different positions of the stiffened plate. The equivalent stress model on the surface of the wing plate, the oblique incidence effect of stress at the stiffened connection, and the stress superposition effect in the stiffened structure are described. Also, experiments compare the elastic-plastic deformation coordination effect of stiffened plates and flat plates under the laser peening path. A corresponding relationship between stress distribution and key parameters including curvature radius and spherical deformation coeffcient is revealed. The forming characteristics verify the accuracy of the stress distribution law.

Modeling Research for Plate Pre-Loading of Laser Peening Forming

The Effect of Elastic Pre-Bending on the Laser Peen Forming of 2024-T351 Aluminum Alloy Plate

Investigation on the bending deformation of laser peen forming with a simplified eigenstrain-based finite element model

Experimental and Numerical Simulation of Sheet Bulging Induced by Laser Shock Peening

Modeling and experimental validation of compaction pressure distribution for automated fiber placement

A Novel Model of Z-pin Insertion in Prepreg Based on Fracture Mechanics

Stress wave propagation and forming mechanism of the stiffened plate by laser peening

Multi-objective optimization of laser shock peening based on an analytical model

Research on Bending Angels of Laser Peen Forming Without Confine Layer

Experimental research on global deformation and through-thickness residual stress in laser peen formed aluminum plates

The effects of laser peening on laser additive manufactured 316L steel

Numerical And Experimental Investigation Of Deformation Field During Laser Forming Of Metal Sheet

Parameter Optimization for Laser Peen Forming on 6005A-T6 Aluminum Alloy Plates to Enhance the Constrained Deformation of Integral Stiffened Plates

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Comprehensive Analysis of Laser Peening Forming Effects on 5083 Aluminum Alloy

Preliminary Studies on Strain Rate Dependence of Laser Shock Forming

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Multi-scale finite element analysis of laser-assisted forming of CF/PEEK composite corner structures

Design of an innovative laser-assisted four-point bending forming process for high-stiffened structure of aluminum alloy

Spatial Distribution Evolution of Residual Stress and Microstructure in Laser-Peen-Formed Plates

Density-based topology optimization of multi-condition peening pattern for laser peen forming