Abstract:Estimation the temperature distribution on nozzle wall by predicting the thermal environment is most important for assessing the life of the nozzle. For that purpose, the coupling simulation of the conjugate heat transfer and transient temperature on the rocket nozzle wall is studied. The equation of radiative heat flux on surfaces of an enclosure filled with inhomogeneous, participating media is established to compute the radiative heat flux, the Bazi equation is used to compute the convective heat transfer at the nozzle wall from the hot gases, the differential equation of 2-D transient conduction in cylindrical coordinate is established and discretized with reclusion form. The conjugate heat transfer coupling with the transiental temperature of two composite walled nozzles are computed, one is the nozzle of an experimental rocket engine fabricated with stainless substrate and a ZrO 2 coating, the other is constructed with multi-layer composite materials. The results show that: the temperatures both on the inside and outside faces of the rocket nozzle increase with time after startup of the rocket engine, the former increase rapidly while the latter increase slowly. On the same cross section, the temperature decreases along the radius inside the wall, which is maximal at the outside face while minimal at the inside face. The temperature of the straight and contraction section of nozzle increases as axial coordinate increases and becomes maximal at the throat, while decreases with axial coordinate in diverging section. The coupling simulation method and the computed results are tested reasonable by comparing the computed results with reported results in reference.

Nonlinear Transient Thermal-Stress Analysis of Composite Nozzle

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

The Transient Temperature Field and Thermal Stress Analysis of Extendible Nozzle with Actuating Cylinder System in Deployment

Temperature Field and Thermal Stress Analysis of Rocket Engine Composite Structure Nozzles

Numerical Study of Temperature and Stress Fields of Nozzles

Thermal Stress Analysis for Carbon/Carbon Material Throat Lining Based on Finite Element Analysis

Numerical Calculation of Temperature and Stress Field of Complex Nozzle

FINITE ELEMENT ANALYSIS FOR THERMAL STRESS OF LONG NOZZLE WITH COMPLEX STRUCTURE

Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation

Temperature and stress field analysis of conical trapped joint C/C nozzle divergent section

Nonlinear Thermo-elastic Finite Element Analysis for Composite Material Barrel

Coupled numerical simulation on flow field and thermo-structure of composite nozzle

Effect of thermal load on the dynamic characteristic of panel

Studies for Aeroelastic Characteristics and Nonlinear Response of FG-CNT Reinforced Composite Panel Considering the Transient Heat Conduction

Nonlinear transient thermal analysis of composite laminate

Coupling Simulation of Heat Transfer and Temperature of the Composite Walled Nozzle of Rocket

Coupled Fluid, Thermal and Structural Analysis of Nozzle Inserts in Solid Rocket Motors

Simulation Analysis of Stress Distribution of Gradient Composite Coatings under the Application of Fluid-solid-thermal Coupling

A Couple Approach for A Conjugate Heat Transfer Investigation of the Shape-Change Effects in A Composite Nozzle

3-D Coupled Fluid-Thermal Finite Element Analysis of 3C-Style Nozzle’s Fluid Field of Al Roll-Casting

Dynamic simulation of nozzle structure based on thermal-fluid-solid coupling analysis