Experimental Research on Dynamic Performance for Vibratory Roller

Si-cheng QIN,Long-zhu CHEN

DOI: https://doi.org/10.3969/j.issn.1000-033X.2001.01.003

2001-01-01

Abstract:Through the analysis of roller-soil system for vibratory roller and drivers' comfort, according to the main working status, the main vibratory response site parameters are measured, by using the measuring results, the theoretical analysis results are proved

What problem does this paper attempt to address?

The Dynamic Performance of a Self Moving Roller

Qing Zhou

2001-01-01

Abstract:The principle of a self moving vibratory roller is introduced. Based on the kinetic analysis, the mathematical model of the soil roller system is set up. According to the results of the numerical simulation and experiment, the dynamic performance of the roller is derived. The special advantage of this roller is of high compaction efficiency,but its self moving speed is not stable.
Dynamic Characteristics Modeling and Simulation of the Intelligent Vibratory Roller with Adjustable Vibration Mode

Shuwen Lin

2011-01-01

Abstract:Multi-mode adjustable principle of intelligent roller was analyzed.An new dynamic model based on vertical vibratory and horizontal oscillation was proposed according to the structural feature of intelligent roller.Taking the XG6133D intelligent roller as an example,the dynamic characteristics of drums and framework in the compaction process of different vibration modes was investigated.The simulation results demonstrated the shock absorber parameters were actively controlled and the vibration mode was adjusted in the compaction process to enhance compaction efficiency and driving comfort.
Dynamic process of horizontal excitation compaction system and its response characteristics

Shu-he ZHENG,Shu-wen LIN

DOI: https://doi.org/10.3969/j.issn.1000-3835.2014.02.028

2014-01-01

Abstract:Based on the horizontal excitation character of an intelligent vibratory roller and the soil parameters,the compaction processes were classified into three compaction conditions,namely,the pure rolling,slip-roll and pure slip. According to the working condition in different stages the interacted dynamic process between the drum and soil was analyzed.Taking the XG6133D intelligent roller as an example,the response characteristics were investigated by means of numerical simulation.During the compaction process,the motion of vibratory drum experiences from single periodic motion to periodic doubling motion,the wave form at peaks and valleys of its time response is distorted,and in spectrums, in addition to the fundamental wave,only rich odd harmonics are presented.The conclusion of the article is valuable to forecast theoretically the compaction status and improve the compaction quality.
Analysis on the Coupled System of Vibratory Roller Vibration Wheel and Soil

Jing Wang,Wei Zhang,Hongyu Xu

DOI: https://doi.org/10.2991/iccet-15.2015.241

2016-01-01

Abstract:In this paper, the intelligent vibration road roller system is simplified to three degrees of freedom dynamic system, the differences between the dynamics model with past is that we not only considering two degrees (vibration wheel, the soil or frame, wheels), But at the same time considering vibratory wheel, frame and the soil under the interaction of three degree of freedom vibration. In this text, Vibratory roller vibration system is mainly studied in the vertical direction vibration, by solving equations, obtaining the expression of the wheel vibration amplitude, the relationship between wheel vibration amplitude and the various soil parameters are studied by using numerical analysis method, the influence of various parameters on the amplitude is discussed. The results show that the parameters of soil have different degrees of influence on amplitude. Among them, the soil stiffness has the most effection on the amplitude. the results can provide the reference data for vibration system design and the real-time monitoring, control of the vibration response.
Nonlinear Model and Simulation Experiment Research of Vibratory Rollers

Yuan Hao,Zhaohui Ren,Feng Wen

DOI: https://doi.org/10.4028/www.scientific.net/amm.121-126.2121

2011-01-01

Applied Mechanics and Materials

Abstract:On the basis of the relation between force and deformation when the plastic deformation of soil mass is studied, nonlinear vibration roller model is built. Based on one type vibratory rollers select the system parameters and calculate the natural frequency. And according to the selected numerical value proceed the numerical simulation with different excitation force frequencies. Meanwhile, obtain and analyze the experimental data according to the vibratory roller experiment. Then the system response characteristic of nonlinear vibration roller is obtained, and the availability of system model is checked. All above provide the valuable theoretical basis for the research of vibrating compacting.
Analysis and Optimization of Level-I Vibration Absorption of Single Drum Vibratory Roller

Xiaobo Zhang,Dawei Zhang,Zhongxu Feng

DOI: https://doi.org/10.4028/www.scientific.net/amr.625.93

2012-01-01

Advanced Materials Research

Abstract:The vibration absorption is the principle factor which influences the working reliability, operating comfort, noise and parts service life of vibratory roller. This paper made a test on the performance of a new type of single drum vibratory roller with a national brand and found the problem of polarization and shimmy; set up a physical model of the roller for simulation analysis, seeking the reasons of polarization and shimmy, as well as proposing the improvement program so that the performance of Level-I vibration absorption of the sample was improved while each indicator of vibration severity can be above the permissible level.
Dynamical property modeling and analysis on intelligent vibratory rollers

Lin Shu-wen

2011-01-01

Abstract:Based on excited vibration modes and structural features of intelligent vibratory rollers,a new 4-DOF dynamical model is proposed.By applying XG6133D intelligent roller as an example,during the compaction process with increasing soil stiffness and decreasing dampness coefficients,the dynamical response properties of vibratory wheel and framework are elaborated based on multiple modes.Afterwards,the variable principles of anti-soil-compaction and frictional forces towards vibratory wheel are speculated.Furthermore,the probability of such complicated working conditions as vertical jumping and horizontal skidding vibrations is analyzed.Therefore,effective metrics are postulated to guarantee the compaction quality.
Dynamic Experimental Study of Compacting Vibrators of an Asphalt Concrete Road Paver

YAN Shi-rong,WEN Bang-chun,GONG Zhao-min,XU Tian-ning,KONG Qing-hua,TAO Yong-sheng

DOI: https://doi.org/10.3969/j.issn.1000-2243.1999.05.012

1999-01-01

Abstract:In order to investigate the relationship between structural parameters of compacting vibrators and kinetic parameters of related vibratory compacting parts,through dynamic experimental study of compacting vibrators of an asphalt concrete road paver made recently in China, the general signal constitution of acceleration of a compacting plate and its changes with different compacted materials, and the signal of the platform of the vibratory system are all obtained under a given excited frequency
Discrete Element Modeling of Vibration Compaction Effect of the Vibratory Roller in Roundtrips on Gravels

Kai Wu,Weichen Sun,Songyu Liu,Haibo Huang

DOI: https://doi.org/10.1520/jte20190910

2020-01-01

Journal of Testing and Evaluation

Abstract:This paper aims to study the vibration compaction mechanism of the vibratory roller on gravels using a two-dimensional discrete element method. The roadbed model was established by gravel particles with irregular shapes, which was closer to reality. The performance parameters of the vibratory roller, such as operating frequency and rolling velocity, were investigated to explore their influences on the operating efficiency of the vibratory roller in roundtrips. The frequencies of 15 Hz and 17 Hz were proved to be the optimal frequency and resonance frequency in the current simulations, respectively. The vibratory roller could achieve a better vibration compaction effect with less power consumption at the optimal frequency. In addition, the number of roundtrips and power consumption should be considered in the selection of the optimal rolling velocity. The movement direction and the contact force distribution of gravels were illustrated by the displacement field, velocity field, as well as the contact force chains. Our results provide a better understanding of the mechanical behavior of gravel particles and their interactions with the vibratory roller.
Dynamic and Control of Vibratory Road Roller Based on Magneto-Rheological Semi-Active Damper

shao na liu,shi rong yan,shu wei li,yao gang zheng

DOI: https://doi.org/10.4028/www.scientific.net/AMR.479-481.1200

2012-01-01

Abstract:Comfort of the vibratory road roller is an important research title. A 2-DOF non-line model is set up, which is more close to the actual situation of the vibratory road roller. A simulation using MATLAB/SIMULINK is carried out to validate this model and study its dynamic characteristic and analyze the motion laws of its housing and wheel. A kind of Magneto-rheological (MR) damper is designed which has been widely used in automotive and bridge damping in recent years, and applied to a vibratory road roller to control it. The control strategy uses fuzzy control. The results indicate that the damping performance of the vibratory road roller which applied MR damper is improved remarkably.
Dynamic Property Analysis on Pulsating Vibratory Roller

辛丽丽,梁继辉,闻邦椿

DOI: https://doi.org/10.3969/j.issn.1672-5581.2008.02.007

2008-01-01

Abstract:By applying the vibration friction upon materials,the resilience against displacement receals hysteresis property.While material compactness is high,the pulsating vibration is produced through vibration roller.Based on these notions,a 2-DOF system model is established in terms of segmental curve.In this manner,the vibration frequency and exciting force towards pulsating vibration is analyzed via numerical method.Afterwards,a testing is conducted to verify the analysis accuracy on simulation and the pulsation impact on compaction effect.It is found that the pulsating vibration occurs in case of high vibration frequency.Alternatively,the vibration frequency,along with high exciting force,is equivalent to the inherent material frequency.Further studied,the sub-harmonic and super-harmonic waves appear in displacement spectrum.With increase of exciting force,the pulsating vibration,together with roller vibration amplitude,increases.Finally,it can be detected that the proper pulsating vibration can enhance the material compaction effect.Therefore,this approach paves a new venue for real-time monitoring on vibration condition and effect improvement on material compactness.
Simulation of Vibratory Roller Based on MATLAB

何建和,严世榕

DOI: https://doi.org/10.3969/j.issn.1006-9348.2004.06.016

2004-01-01

Abstract:The article puts forward one kind of three-degree of freedom nonlinear vibratory roller-soil dynamical model with two grade absorbers system,and then does some research work on the dynamic features under the nonlinear condition by means of the simulation tool--MATLAB.In addition,the article points out the close relationship between the behavior of the system and the chaotic movement.As the model and the result of the article are new,they have important referential value to the design and manufacture departments related.
Analysis on dynamic characteristics of the roller with adjustable vibration mode

Pei-hui SHEN,Shu-wen LIN

DOI: https://doi.org/10.3969/j.issn.1672-5581.2006.02.005

2006-01-01

Abstract:There are many roller models researching on single vibration mode such as the vertical vibration and the horizontal oscillation,but seldom on multi-vibration modes.According to the character of roller with adjustable vibration mode,this study puts forward a vibration model.Taking the YZC12 intelligent roller as an example,the author analysis dynamic characteristics of the interaction between roller with soil in different vibration modes.
Experimental studies on soil compaction using BOMAG BW 226 BVC-5 vibratory roller

Vera Breskich

DOI: https://doi.org/10.1051/e3sconf/202337603028

2023-01-01

E3S Web of Conferences

Abstract:Mathematical modelling is used to assess the influence of various factors on the result of soil compaction with a vibratory roller. Verification of the mathematical model is carried out by comparing it with the results of experimental studies. Expanding the list of roller models in the experimental studies allows expanding the range of conditions for verification of the mathematical model. The paper presents the results of experimental studies of soil compaction by a vibratory roller BOMAG BW 226 BVC-5. Data on the change in the value of the dynamic deformation modulus of the Evd soil were obtained in relation to the number of roller passes during the compaction of the sand-gravel mixture with a layer thickness of 0.5 m. The peculiarities are revealed, which is reasonable to consider when carrying out further experimental research. Experimental studies of the range of vertical movements of the drum, as well as vertical accelerations of the drum and its frame, were performed on a BOMAG BW 226 BVC-5 vibrating roller during compaction of the sand-gravel mixture. The compaction result after each pass was evaluated using the value of the dynamic deformation modulus Evd, measured using a ZORN ZFG 3.0 dynamic loading unit. In the experiment, the vertical movements of the vibrating roll were recorded using a BAUMER OADM 13U6480/S35A laser sensor. The accelerations of the vibrating roll and the roll frame were recorded using piezoelectric accelerometers of models AR2099-100 and AR99-100. When processing the readings of the sensors, digital signal processing technology was used - low-pass filters with the boundary frequency of 200 Hz. The research was carried out at two sites with different soil moisture conditions. The results obtained show that the oscillation range of the roll as well as the amplitude values of vertical accelerations of the roll and the frame of the roll increase slightly with increasing soil deformation modulus Evd. The results of this experiment correlate with the research conducted on roller models. The results of the experiment will help to further verify the mathematical model of the roller and to carry out experimental studies of a similar nature.

English Else
The Dynamic Response of the Vibrating Compactor Roller, Depending on the Viscoelastic Properties of the Soil

Cornelia Dobrescu

DOI: https://doi.org/10.3390/asi3020025

2020-06-23

Applied System Innovation

Abstract:The present paper addresses the problem of the dynamic response of a vibrating equipment for soil compaction. In essence, dynamic response vibrations are analysed by applying an inertial-type perturbing force. This is generated by rotating an eccentric mass with variable angular velocity, in order to reach the regime necessary to ensure the degree of compaction. The original character of the research is that during the compaction process, the soil layers with certain compositions of clay, sand, water and stabilizing substances change their rigidity and/or amortization. In this case, two situations were analysed, both experimentally and with numerical modelling, with special results and practical engineering conclusions, favourable to the evaluation of the interaction between vibrator roller–compacted ground. We mention that the families of amplitude–pulse and transmitted force–pulse response curves are presented, from which the dynamic effect in the compaction process results after each passage on the same layer of soil, until the necessary compaction state is reached.
Dynamical analysis and testing on horizontally-directed system of intelligent vibratory rollers

Pei-hui SHEN,Shu-wen LIN

DOI: https://doi.org/10.3969/j.issn.1672-5581.2011.04.019

2011-01-01

Abstract:Based on a global dynamical model,the local analytical solutions are preliminarily obtained for both motional phases of contact and slide.Afterwards,the dynamical properties of intelligent vibratory rollers are analyzed in terms of the horizontally-directed system.Subsequently,it is found that,with regard to the soil compactness,the vibration feedback properties of horizontally-directed system are obviously different from those of vertically-directed system.Meanwhile,the amplitudes of high-order harmonic waves do not decrease by orders,whereas the energy from odd-order harmonic waves is higher than that from even-order harmonic waves.Consequently,it is detected from an on-site testing on asphalt compacting that the amplitudes of even-order harmonic waves with frequencies of 70.021 Hz and 142.822 Hz are relatively lower,whilst the amplitude of odd-order harmonic wave with frequency of 107.42 Hz is relatively higher.
Analysis and tests for dynamic characteristics of a compacted System under double-excitation

Peihui SHEN,Shuwen LIN

DOI: https://doi.org/10.13465/j.cnki.jvs.2017.11.036

2017-01-01

Abstract:A double-steel-wheel vibratory roller possesses special vibration characteristics under double-excitation.Considering the asymmetric hysteretic characteristic of soil material in different compacting stages and the possibility of jump-vibration decoupling between the two vibratory wheels in actual working conditions,a 7-DOF overall model was put forward.Using the first order approximation,the equivalent stiffness and damping in different compacting stages were obtained with the harmonic linearization and KBM (Krylov-Bogolyubov-Mitropolsky) combined method.In addition,beatvibration characteristics of the roller cab due to the difference between vibration frequencies of the front wheel and the rear one were systematically studied.Under model's parameters in different working conditions,it was shown that Poincare motion sections reflect nonlinear motion characteristics of a single period bifurcation,a double-period one,a three-period one and a multi-period one;the dynamic system produces higher order super-harmonic and sub-harmonic resonances during later compacting stages;with a larger exciting force and a lower frequency condition,the cab enters a chaos vibration;through adjusting excitation forces and the excited frequencies of the double-wheel reasonably,the chaos vibration can be suppressed effectively,the service life of the roller components can be extended and the operating comfort can be improved.The worksite compacting operation tests verified the rationality of the proposed model and theoretical analysis.
Dynamical response to vibration roller compaction and its application in intelligent compaction

Zhou Fang,Yu Zhu,Tao Ma,Yang Zhang,Tao Han,Jinglin Zhang

DOI: https://doi.org/10.1016/j.autcon.2022.104473

IF: 10.3

2022-10-01

Automation in Construction

Abstract:Dynamical responses of vibratory compaction are the basis for extracting compaction indexes in intelligent compaction (IC) technology. However, dynamical response characteristics and its variation mechanisms have not been sufficiently investigated. In this study, a vibratory compaction model was built utilizing finite element (FE) method to observe the characteristics, and nonlinear system theory was introduced to explain the variation mechanisms. The results showed that the dynamical responses varied greatly in different stages, and five operation modes can be classified accordingly. These modes originated from the bifurcation phenomena caused by the enhancement of decoupling nonlinearity between drum and soil. In addition, the variation trend of compaction indexes differed in different modes. These results facilitated to understand the connotation of dynamical response characteristics and laid a foundation for further feedback control technology. The further research can focus on exploring the method of adjusting roller working parameters to achieve an optimal operation mode.

construction & building technology,engineering, civil
Experimental Research of Dynamic Continuous Compaction Control of Subgrade Compaction

HE Minsuo,LI Liang,NIE Zhihong

DOI: https://doi.org/10.3969/j.issn.1673-0291.2010.06.006

2010-01-01

Abstract:According to the dynamics analysis of the interaction between road roller and subgrade structure,the dynamic continuous compaction control parameter Cv is put forward through dynamic testing technology and system identification theory.Comparison analysis between Cv and conventional test show that the Cv has higher reliability,relationship between the site experiment results and dynamic evaluation indices are established.The results show that the compaction indices Cv give more accurate information about the subgrade compacting state,thus providing an essential basis for the engineering application.
Experimental study on dynamic response of vibratory compaction rockfill embankment

Ai-jun CHEN,Jia-sheng ZHANG,Jian-qing HE,Zhi-bing WANG

DOI: https://doi.org/10.13465/j.cnki.jvs.2014.20.029

2014-01-01

Abstract:For the weathered slate embankment test section of Sansui-Liping highway in Guizhou province,through burying earth pressure boxes at different depths in the embankment,and by using two kinds of vibratory compaction rollers,the vertical and horizontal dynamic responses at different depths were tested in field.The results show that:when the shock wave is propagating in the soil within short or middle distance,the frequency of the vibration wave remains constant or decreases slightly.Soil particles are submitted to the process of pressure loading-unloading cycle under the action of dynamic stress.High-power roller produces significant push effect on topsoil and looses skin fillers.Dynamic stress diffuses downward in the soil at a certain diffusion angle and different roller makes different diffusion angle. According to the wave theory,the dynamic stress decays exponentially along the depth in the soil,and this conclusion has been verified by the test data.The attenuation coefficient of vertical dynamic stress is twice as large as that of horizontal dynamic stress.Dynamic stress levels generated by super power roller are far greater than those by heavy roller.Heavy roller may induce local resonance phenomenon in the soil.The measured dynamic lateral pressure coefficient is not a fixed value,it increases linearly with the increase of depth.

Experimental Research on Dynamic Performance for Vibratory Roller

The Dynamic Performance of a Self Moving Roller

Dynamic Characteristics Modeling and Simulation of the Intelligent Vibratory Roller with Adjustable Vibration Mode

Dynamic process of horizontal excitation compaction system and its response characteristics

Analysis on the Coupled System of Vibratory Roller Vibration Wheel and Soil

Nonlinear Model and Simulation Experiment Research of Vibratory Rollers

Analysis and Optimization of Level-I Vibration Absorption of Single Drum Vibratory Roller

Dynamical property modeling and analysis on intelligent vibratory rollers

Dynamic Experimental Study of Compacting Vibrators of an Asphalt Concrete Road Paver

Discrete Element Modeling of Vibration Compaction Effect of the Vibratory Roller in Roundtrips on Gravels

Dynamic and Control of Vibratory Road Roller Based on Magneto-Rheological Semi-Active Damper

Dynamic Property Analysis on Pulsating Vibratory Roller

Simulation of Vibratory Roller Based on MATLAB

Analysis on dynamic characteristics of the roller with adjustable vibration mode

Experimental studies on soil compaction using BOMAG BW 226 BVC-5 vibratory roller

The Dynamic Response of the Vibrating Compactor Roller, Depending on the Viscoelastic Properties of the Soil

Dynamical analysis and testing on horizontally-directed system of intelligent vibratory rollers

Analysis and tests for dynamic characteristics of a compacted System under double-excitation

Dynamical response to vibration roller compaction and its application in intelligent compaction

Experimental Research of Dynamic Continuous Compaction Control of Subgrade Compaction

Experimental study on dynamic response of vibratory compaction rockfill embankment