Abstract:The effectiveness of tunnel monitoring is a challenging task due to the limitations of monitoring gauges and lack of monitoring sections. To address this, a novel theoretical analysis-based monitoring method for tunnel structures was proposed in this study. A theoretical approach was employed to establish the correlation between external loads and structural stress–strain response in tunnel lining during grouting and stability periods. A method has been developed to derive the distribution of external loads and internal forces throughout the entire tunnel using strain monitoring at specific locations on the structure. This method has been further validated through a case study of the Liucun Tunnel, providing insights into the accuracy of the monitoring approach. It is found that during the grouting period, the segment ring is surrounded by grout, resulting in peak external loads and internal forces. As the tunnel lining enters the load stability period, both the external loads and internal forces gradually decrease and stabilize. Comparing the results of the monitored method for deriving tunnel external loads, structural bending moments and axial forces with the on-situ measurements, the new monitoring method yields errors in the response of tunnel external loads and internal forces. The average error in external loads is less than 12%, the average error in bending moments is less than 20%, and the average error in axial forces is less than 8%. The proposed monitoring method effectively addresses the issue of long-term failure of monitoring elements due to its replaceability. Additionally, utilizing theoretical methods for derivation allows obtaining more tunnel structural information based on limited monitoring data from the elements. This provides a new approach for long-term structural health monitoring. To address the existing errors in the monitoring method described in this study, the accuracy can be further improved by optimizing the model, incorporating more advanced monitoring techniques, and implementing standardized and improved construction practices.

Technological Scheme Design for Monitoring and Measuring of Tunnel Groups

Application of structural health monitoring in Hangzhou Qiantang River tunnel

Monitoring and analysis of deformations and movements of slurry shield tunnel linings

Principles and Application of a Smart Tunnel Laser Convergence Gauge for Monitoring Tunnel Crown Settlement

Measurement on Soil Deformation and Numerical Simulation During Tunneling Process

Reasonable Construction Methods For Tunneling Beneath An Operating Highway

Study on structural mechanical characteristics and safety warning of NATM tunnel in aquifer

Structural Monitoring of Metro Infrastructure During Shield Tunneling Construction.

STUDY ON MONITORING AND BACK ANALYSIS FOR ROAD TUNNEL WITH COMPLEX GEOLOGY

Xi'an Nanwutai Tunnel's Design and Construction by NATM

Long-Term Deformation Monitoring of Metro-Tunnel Airshaft Excavation During Construction Stage.

Tunnel Information Constructionzone

Safety monitoring of railway tunnel construction using FBG sensing technology

Design and Implementation of Intelligent Monitoring System for Tunnel

Practice of Displacement Backward Based on Monitoring and Measuring Technologies for Tunnel Surrounding Rock

A tunnel structure health monitoring method based on surface strain monitoring

Overview of Tunnel Detection Technology

On-Site Monitoring for the Stability Evaluation of a Highway Tunnel above Goaves of Multi-Layer Coal Seams

Detection and comprehensive treatment for giant karst caves under the tunnel floor: a case study in Guangxi, China

Monitoring Analysis Of Outlet Section Of Tunnels With Small Clear-Distance In Half-Hard And Half-Soft Rock Strata

Automatic subway tunnel displacement monitoring using robotic total station