Abstract:A case study of a significant surface settlement induced by tunneling in permeable strata with the shallow tunneling method is presented in this paper. The measurements of surface settlements along the excavation direction were first analyzed to highlight the impacts of groundwater seepage. Due to the groundwater inflow inside a double-arched tunnel, the surface settlement developed to a high level far beyond the measured crown settlement. The settlement-affected zone extended to 4 times the tunnel height ahead of the forefront heading and 1.5 times the tunnel height behind the hindmost heading. Consolidation resulting from high pore pressure change was considered to be the main mechanism for the large surface settlements. In addition, a 3D fluid-mechanical coupled numerical analysis was carried out to confirm the relationship between the significant surface settlement and pore pressure variation. This analysis reveals that lowering the permeability of the small pipe grouting zone, especially of the primary lining, could lessen the drop in pore pressure in the overlying strata, further reducing the total surface settlement. The numerical results also suggest that the transverse range of vertical displacement could be quite wide, and the settlement developed integrally from the tunnel crown towards the ground surface due to groundwater seepage. Moreover, the effect of advance drainage on surface settlement was investigated based on the same numerical model. Drainage with horizontal boreholes could considerably increase the safety of tunnel heading but had limited impact on surface settlement. Finally, the applications of pre-grouting and advance drainage measures were discussed for tunneling cases in permeable strata.

Principles and Application of a Smart Tunnel Laser Convergence Gauge for Monitoring Tunnel Crown Settlement

Development and Application of Smart Tunnel Laser Convergence Gauge

Monitoring and analysis of deformations and movements of slurry shield tunnel linings

Surface Settlements Induced by Tunneling in Permeable Strata: a Case History of Shenzhen Metro

Measurement on Soil Deformation and Numerical Simulation During Tunneling Process

Real Time Measurement of Subgrade Settlement in High Speed Railways with a Resolution of 0.25 mm Using a Laser Imaging Method

Construction optimization of shallow-buried tunnel in gravel strata based on controlling settlement of the crown

Deformation monitoring of noncircular tunnels based on 3D laser scanning

Tunnel Contour Detection During Construction Based on Digital Image Correlation

Long-Term Deformation Monitoring of Metro-Tunnel Airshaft Excavation During Construction Stage.

Tunnel Monitoring and Measuring System Using Mobile Laser Scanning: Design and Deployment

Full-Section Deformation Monitoring of High-Altitude Fault Tunnels Based on Three-Dimensional Laser Scanning Technology

A State-of-the-Practice Review of Three-Dimensional Laser Scanning Technology for Tunnel Distress Monitoring

Systematic Approach for Tunnel Deformation Monitoring with Terrestrial Laser Scanning

Diversified Application of General Total Station in Tunnel Monitoring Measurement

Dynamic Inspection Technology of Tunnel Deformation Based on Onboard LIDAR

Analysis on the Crown Convergence Deformation of Surrounding Rock for Double-Shield TBM Tunnel Based on Advance Borehole Monitoring and Inversion Analysis

Automatic subway tunnel displacement monitoring using robotic total station

Method for Tunnel Displacements Calculation Based on Mobile Tunnel Monitoring System

Application of 3D laser scanning on NATM tunnel deformation measurement during construction

A low-cost and real-time pose measurement method for straight pipe jacking machine based on dual-screen laser target in tunneling guidance