Abstract:A cryogenic hose is used to transport liquefied natural gas at sea, where flexible fittings are sealed by corrugated lining and end flange welding. However, the extreme cryogenic temperatures of the conveyed fluid introduce substantial challenges to the integrity of the fitting seals' structure during the LNG transfer process. In order to study the sealing performance of the fitting under LNG conveying conditions, this paper was based on the general finite element software ABAQUS 6.11 to carry out a thermo-mechanical coupling analysis of the end sealing stress. This paper also established a sealing performance analysis model of the corrugated fitting welding area under the fitting action of LNG load and internal pressure load. A sensitivity analysis was conducted on the influence of weld clearance, blunt edge size, and weld residual height on the weld stress of a fitting ring. The results show that, under the combined action of the medium internal pressure and cryogenic load, the size design of the weld area significantly affects the sealing performance of the fitting, among which the equivalent force of the weld clearance butt sealing area has the greatest impact. Moreover, it was found that a pressure of 5 MPa was 2 mm when the weld clearance was 2 mm, and the average stress at the weld was 53.68 MPa. Further, considering the synergistic influence of the blunt edge size, the weld clearance was 3 mm, the stress was minimal when the blunt side size was 4 mm, and the average stress was 17.42 MPa. These research results can serve as a reference for the design and analysis of the sealing structure of non-adhesive inner corrugated cryogenic hose fittings.

Effect of Low Temperature Brittleness on Residual Ultimate Strength of LNG Carrier

Finite element analysis of strength of mobile cryogenic LNG storage tank

Fatigue Strength Assessment of LNG Vessel and Discussion on the Influence of Low Temperature

Effects of Crack Position on Fatigue Life of Large Seamless Storage Vessels Made of 4130X for Hydrogen Refueling Station

Research on Temperature Field and Thermal Stress of Liquefied Natural Gas Carrier with Incomplete Insulation

Nonlinear Response of Partial Ship Structure Caused by Ultra-low Temperature

Failure research of T-joint at liquefied natural gas tanker

Nonlinear Thermal Stress Analysis of a Partial Structure of an LNG Carrier

Multimode Coupled Failure Assessment of an LNGC Cargo Containment System Considering Flexible Boundary Condition

A Research on Temperature Field and Stress Field of Large-Scale LNG Ship

Effect of Partial Failure of Self-Supporting Prismatic Type B Liquefied Natural Gas Carriers' Thermal Insulation Layer on Structure Safety

Structural Characteristics of Corrugated Steel Inner Walls in Liquefied Natural Gas Ship Membrane Compartments

Fatigue Analysis of Membrane LNG Ship under Alternating Temperature Load

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Effect of Tempering on Bending-Induced Material Strength Inhomogeneity in Hydrogenation Reactor Shells

Thermal Stress Analysis of Process Piping System Installed on LNG Vessel Subject to Hull Design Loads

Thermo-Mechanical Coupling Analysis of the Sealing Structure Stress of LNG Cryogenic Hose Fittings

Effect of the Joule-Thomson Cooling on the Leak-Before-break Approach

Thermodynamics and Thermal Stress Analysis of Plate-fin Structures in LNG Heat Exchanger

Effects of Residual Stress on Failure Mode of Pressure Vessels

Fatigue Analysis of a 40 ft LNG ISO Tank Container