Abstract:Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, Ahead of Print. This paper presents a procedure for evaluating the structural safety of Liquefied Natural Gas (LNG) Cargo Containment System (CCS) against sloshing load by comparing the results of linear and nonlinear dynamic structural strength analysis with those of verified reference vessels. This comparative procedure indirectly considers (1) limitation of implementing real physical phenomena in model experiments including the Froude scaling method, density ratio, etc., (2) assumptions in statistical analysis for calculating design loads, and (3) complicated effects not implemented in nonlinear dynamic analysis such as phase transition between liquid and gas, hull deflection, and the detailed geometry of the CCS, among others. The uncertainties in sloshing model experiments and statistical analysis can be addressed by introducing the pressure correction factors, which make the linear design loads of the reference vessel satisfy the CCS's capacity. Finally, the structural nonlinearity, which was not accounted for in the nonlinear dynamic analysis, can be taken into consideration through a comparison of the usage factors from nonlinear dynamic analysis. To apply the proposed structural assessment procedure, the GTT NO96 series were selected and applied to two failure modes. In the application of this procedure, the Triangular Impulse Response Function (TIRF) method was adopted, to efficiently calculate numerous linear dynamic structural strength analyses required for Dynamic Amplification Factor (DAF). Through this application applying larger sloshing loads to the reinforced NO96 CCS of the target vessel compared to the reference vessel, the feasibility of this procedure was shown.

Nonlinear Thermal Stress Analysis of a Partial Structure of an LNG Carrier

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

Nonlinear Response of Partial Ship Structure Caused by Ultra-low Temperature

Thermo-Mechanical Coupling Computation and Warping Analysis During Controlled-Cooling of X65 Heavy Pipeline-Plate

A Research on Temperature Field and Stress Field of Large-Scale LNG Ship

Effect of Partial Failure of Self-Supporting Prismatic Type B Liquefied Natural Gas Carriers' Thermal Insulation Layer on Structure Safety

Research on Temperature Field and Thermal Stress of Liquefied Natural Gas Carrier with Incomplete Insulation

Thermodynamics and Thermal Stress Analysis of Plate-fin Structures in LNG Heat Exchanger

Finite element analysis of strength of mobile cryogenic LNG storage tank

Thermal Stress Analysis of Process Piping System Installed on LNG Vessel Subject to Hull Design Loads

Case Study Of Nonlinear Buckling With Shape Distortion Due To Thermal Load Ocr

Fatigue Analysis of Membrane LNG Ship under Alternating Temperature Load

Effect of Low Temperature Brittleness on Residual Ultimate Strength of LNG Carrier

An Analytical Method for the Thermo-Mechanics Coupling Study of Thin-Walled Spherical Shell Structure

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Overall Temperature Field and Thermal Stress Analysis of 30000m(3) LNG Storage Tanks

Fatigue Strength Assessment of LNG Vessel and Discussion on the Influence of Low Temperature

Procedure for evaluation of LNG CCS with reference vessel using nonlinear dynamic analysis

The influence of operation parameters on stress of plate-fin structures in LNG heat exchanger

Thermal Stress Analysis of Concrete Wall of LNG Tank During Construction Period

Application Analysis on π-shaped Deformation Compensator of Cryogenic Pipeline of LNG Carrier