Abstract:The Fenshui River Bridge is a steel-concrete composite girder bridge with a main span of 90 m. Due to the topographical constraints, the steel box girder was constructed without the use of auxiliary piers, employing incremental launching techniques. This article focuses on the construction technology used for the steel box girder of the Fenshui River Bridge. Firstly, using the influence matrix method, the cable force is determined based on the maximum cantilever state of the structure, with the vertical deformation of the front end of the guide beam and the horizontal deformation of the top of the tower as the control objectives. The unstressed cable length is then calculated based on the mechanical relationship between cable deformation and cable force. A calculation method for adaptive cable force is proposed, which is based on the variation of the stress-free cable length within the adaptive structural system. Next, the finite element analysis method was employed to determine the optimal layout position for the tower. The results indicate that during the incremental launching construction of the steel box girder, the calculated cable forces using the method proposed in this paper are in close agreement with the measured cable forces. At the maximum cantilever state of the structure, the calculated and measured values of the cable force resulted in a percentage difference of 3.96%. The calculated values of deformation and stress in key sections showed a percentage difference of 6.4% for deformation and 6.6% for stress. To maximize the effectiveness of the tower and cable, the tower should be positioned above the bridge pier when the guide beam crosses the maximum span. The findings of this paper can serve as a reference for the construction of similar types of bridges.

Calculation Method of Concrete Pylon with Steel Anchor Box in Long-span Cable-stayed Bridge

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Calculation of stayed-buckle cable forces for concrete-filled steel tubular arch bridge with long span in process of lifting

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

The Full-scale Model Test and Spatial Analysis for the Segment of Cable Pylon of Cable-stayed Bridge

OPTIMIZATION OF STAYED-BUCKLE CABLE FORCES DURING ADJUSTMENT OF THE LINE-SHAPE ON LONG SPAN ARCH BRIDGE

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Calculation method of temporary cable force in incremental launching construction of large span steel box girder without auxiliary pier

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF TOWER OF CABLE STAYED BRIDGE OF THE SECOND YANGTZE RIVER BRIDGE IN NANJING

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Steel-concrete-steel sandwich composite pylons for cable-stayed bridges: structural behaviour of cable anchorage

Practical Calculation of Cable-Stayed Arch Bridge Lateral Stability

Comparative Study on the Methods for Analyzing Transverse Intemal Force of Prestressed Concrete Box Girder Bridge

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Influence of effect of creeping of the long span prestressed concrete cable-stayed bridge on internal forces in structural health monitoring

Design and key construction technology of steel-concrete-steel sandwich composite pylon for a large span cable-stayed bridge