Development of Bonded (La,ce,y)-Fe-b Permanent Magnets with Higher Performance/Cost Ratio Than Nd-Fe-B and (Nd,la,ce)-Fe-b Magnets
Weisen Huang,Xuefeng Liao,Jiayi He,Hongya Yu,Zhongwu Liu
DOI: https://doi.org/10.1016/j.jmmm.2022.169554
2022-01-01
SSRN Electronic Journal
Abstract:Aiming at developing cost-effective bonded permanent magnets, the microstructure, magnetic properties, thermal stability, corrosion resistance, and mechanical properties of bonded (La,Ce,Y)-Fe-B magnet were investigated and compared with Nd-Fe-B and (Nd,La,Ce)-Fe-B magnets. Only RE2Fe14B and Ce(La) grain boundary phases were found in the melt-spun (La,Ce,Y)-Fe-B alloy with a composition of [(Ce0.7La0.3)(0.8)Y-0.2](17)Fe(7)8B(6), and no paramagnetic CeFe2 phase was detected, which is beneficial to hard magnetic properties. Bonded (La,Ce,Y)-Fe-B magnet exhibits a combination of magnetic properties with intrinsic coercivity Hcj = 330 kA/m, remanence Jr = 0.40 T, and maximum energy product (BH)max = 21.7 kJ/m(3), compared to Hcj = 519 kA/m, Jr = 0.52 T, and (BH)max = 43.8 kJ/m(3) for (Nd,La,Ce)-Fe-B magnet and Hcj = 751 kA/m, Jr = 0.66 T, and (BH)max = 75.3 kJ/m3 for Nd-Fe-B magnet. Despite its relatively low hard magnetic properties, (La,Ce,Y)-Fe-B magnet exhibits the highest performance/cost ratio. In the temperature range of 300-400 K, (La,Ce,Y)-Fe-B magnet shows better thermal stability than Nd-containing magnets, demonstrated by the high temperature coefficient of coercivity (-0.181%/K). The corrosion processed of bonded magnets are studied, and (La,Ce,Y)-Fe-B magnet exhibits better corrosion resistance than other magnets. The mechanical properties of various bonded magnets were also investigated and the highest compressive strength was obtained in (La,Ce,Y)-Fe-B magnet, possibly due to its higher density and the less brittleness of (La,Ce,Y)-Fe-B alloy. This work is beneficial to accelerating the industrialization of high abundance RE magnets.