Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. The motion of magnetic-driven micro motor is controlled by external magnetic field, does not need any fuel which has good biocompatibility. However, its driving torque needs to be further improved. For it, a magnetic-driven micro-motor with speed-reduction function is proposed. The main elements for the micro-motor includes wave generator, central ring, and movable tooth frame which had to be fabricated with Electron beam lithography and vacuum evaporation coating technology. So, related processing parameters should be optimized to obtain high quality elements of the micro-motor. Here, a magnetic-driven micro-motor with speed-reduction function is proposed. Fabrication and manipulation techniques of the main elements for the micro-motor, such as wave generator, central ring, and movable tooth frame, are studied. Electron beam lithography, electron microscope, and atomic force microscopy (AFM) are applied to optimize the parameters of electron beam lithography. The optimized photolithography parameters are obtained, by which the micro movable tooth frame is successfully developed, and the photoresist molds of the wave generator and central ring is produced. Using vacuum evaporation coating technology, effect of evaporation rate on the quality of micro-parts is studied. The optimized evaporation rate is obtained, by which the nickel-based wave generator and copper-based center ring are successfully developed. The nickel-based wave generator and copper-based central ring are effectively peeled off from the substrate by ultrasonic oscillation technique. The effective manipulation of the wave generator and central ring is accomplished by AFM and piezoelectric-driven micro-probe.

Fabrication and Characterization of Bonded NdFeB Microstructures for Microelectromechanical Systems Applications

Magnetostriction and electrical resistivity of Sm0.88Nd0.12Fe1.93 bonded composites

Fabrication of NdFeB micromagnets based on vacuum negative pressure injection

Investigation of Wafer-Level Fabricated Permanent Micromagnets for MEMS

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets

Multi-pole Magnetization of NdFeB Magnetic Elastomers Via a Programmable Magnetic Stamp Inspired by Movable Type Printing

A novel strategy to design and fabricate Nd-Fe-B magnets

A novel method combining additive manufacturing and alloy infiltration for NdFeB bonded magnet fabrication

Fabrication of highly dense isotropic Nd-Fe-B bonded magnets via extrusion-based additive manufacturing

A Microstructure Enhancement Method for Hard Magnetic Particle Chains Based on Magnetic Field Oscillation Sieve

Fabrication and Integration of Microscale Permanent Magnets for Particle Separation in Microfluidics

A comparative study of Ni75Fe25 microcomponents fabricated by microelectroforming and micromolding

Microscale Magnetic Field Modulation Using Rapidly Patterned Soft Magnetic Microstructures

Effect of microstructure on magnetic properties of Nd-Fe-B permanent magnet

Fabrication of Low-Cost Nd–Fe–B Sintered Magnets Reusing Ultrafine Powders

Net Shape 3D Printed NdFeB Permanent Magnet

Additive Manufacturing of Bulk Nanocrystalline FeNdB Based Permanent Magnets

Integration of Sm2Co17 Micromagnets in a Ferromagnetic Multipolar Microrotor to Enhance MEMS and Micromotor Performance

Fabrication and manipulation for key elements of magnetic-driven speed-reduction micro-motor

Preparation of Anisotropic Bonded NdFeB/SmFeN Hybrid Magnets by Mixing Two Different Size Powders