Abstract:Laser powder-bed fusion (PBF-LB), a class of additive manufacturing (AM), has attracted wide interest in the production of Nd-Fe-B permanent magnets, benefiting from the minimisation of waste of rare-earth elements and the post-processing requirements. Most research on PBF-LB Nd-Fe-B has focused on reducing defects in printed parts alongside the improvement of the resultant magnetic properties. Detailed analysis of the microstructure that results in permanent magnetic properties is yet to be published. In this research, a combination of high-resolution microstructural investigations was conducted for this purpose. For the first time, an in-depth analysis of the grain structure in terms of morphology, size distribution, and texture is presented and correlated to the permanent magnetic performance. Melt pools showed a hierarchical grain size distribution of primary Nd 2 Fe 14 B phase grains with a polygonal morphology and random crystalline alignment, in addition to a small amount of Nd-rich and Nd-lean precipitates in the matrix of the Ti-rich amorphous grain boundaries. The permanent magnetic properties of this material are mainly determined by the nanostructured Nd 2 Fe 14 B grains and the amorphous Ti-rich iron-based intergranular phase but could be weakened by precipitates that act as magnetic pores. Remelting during PBF-LB led to the transformation of the coarse grains of the previously solidified layer to fine ones, favourable for the permanent magnetic properties. The mechanisms of these complex phase formations and transformations during processing and the development of the nanocrystalline microstructure are elucidated in this paper as a basis for informing the optimisation process for microstructural development.

Additive Manufacturing of Bulk Nanocrystalline FeNdB Based Permanent Magnets

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Boosting Coercivity of 3D Printed Hard Magnets through Nano-Modification of the Powder Feedstock

Additive manufacturing of highly dense anisotropic Nd–Fe–B bonded magnets

Additive Manufacturing of Bonded Nd–Fe–B—Effect of Process Parameters on Magnetic Properties

Amorphous-crystalline nanostructured Nd-Fe-B permanent magnets using laser powder bed fusion: Metallurgy and magnetic properties

Fabrication of highly dense isotropic Nd-Fe-B bonded magnets via extrusion-based additive manufacturing

Additive manufactured isotropic NdFeB magnets by stereolithography, fused filament fabrication, and selective laser sintering

Additive manufacturing of heavy rare earth free high-coercivity permanent magnets

Laser Powder Bed Fusion of anisotropic Nd-Fe-B bonded magnets utilizing an in situ mechanical alignment approach

Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Laser powder bed fusion of a nanocrystalline Finemet Fe-based alloy for soft magnetic applications

Net Shape 3D Printed NdFeB Permanent Magnet

A novel method combining additive manufacturing and alloy infiltration for NdFeB bonded magnet fabrication

Additive Manufactured Polymer-Bonded Isotropic NdFeB Magnets by Stereolithography and Their Comparison to Fused Filament Fabricated and Selective Laser Sintered Magnets

Construction of High-Performance Multi-Main-phase Nd–Dy–Fe–B Sintered Magnets with Strengthened Chemical Heterogeneity

Bulk Alpha-Fe/Nd2fe14b Nanocomposite Magnets Prepared by the Phase Transition of Amorphous Nd9fe81co3nb1b6 under High Pressure

Nd-Fe-B Sintered Magnets with Low Rare Earth Content Fabricated Via Dy71.5Fe28.5 Grain Boundary Restructuring

In Situ Alloying of Fe-Cr-Co Permanent Magnet by Selective Laser Melting of Elemental Iron, Chromium and Cobalt Mixed Powders

Bulk Α-Fe/nd2fe14b Nanocomposite Magnets Produced by Severe Plastic Deformation Combined with Thermal Annealing