Abstract:There are many sand-laden waters in China, and the wear of hydraulic structures caused by sand-laden water diversion has been paid more and more attention. Taking the spillway of a reservoir as the research object, the numerical model of erosion wear caused by sediment-laden particle flows on the spillway was established by using the computational fluid dynamics (CFD) method, VOF (Volume of Fluid) multiphase flow model and DPM (Discrete Phase Model). Through the simulation analysis of the spillway’s overall erosion, the distribution of the spillway erosion wear was obtained. Then, according to the main wear parts, the single variable, such as sediment diameter, sediment concentration, flow velocity and gate opening degree, was changed to study the erosion amount of the spillway and the distribution law of the spillway erosion parts. The results show that the main erosion sites of the spillway are at the bottom of the gate chamber and the middle section of the spillway. The maximum erosion increases linearly with the increase in sediment concentration. With the increase in sediment concentration, the sediment concentration changed from 1 kg/m3 to 6 kg/m3, and the maximum erosion of the spillway increased from 2.58 × 10−7 kg/m2 to 1.53 × 10−6 kg/m2. The erosion at the bottom of the spillway and gate leaf increases first and then decreases with the increase in sediment diameter and reaches the maximum value when the particle size is 0.002 mm. The erosion at the bottom of the spillway and the gate leaf increases with different growth trends as the flow velocity increases, when the flow velocity increases from 2 m/s to 9 m/s and the maximum erosion amount at the bottom of the spillway increases from 3.66 × 10−7 kg/m2 to 1.14 × 10−6 kg/m2, and the maximum erosion of the gate leaf increased from 1.66 × 10−8 kg/m2 to 8.98 × 10−6 kg/m2. The erosion amount at the bottom of the spillway increases with the increase in the gate opening between 0 and 3 m and tends to be stable when the gate opening is greater than 3 m. The maximum erosion position moves to the rear part of the spillway with the change in the gate opening. The change in the gate opening has no obvious effect on the erosion amount of the gate leaf but only changes the area of the gate erosion part. Thus, the erosion wear distribution of spillway under different work conditions is summarized, and the qualitative study between the erosion wear and the distribution of sediment diameter, sediment concentration, flow velocity and gate opening degree is made.

Influence of wheel spokes structure on the distribution of surface water film during the wading of road vehicle

Investigation of Multi-Degree of Freedom Damped Dynamic Absorber Applied to Wheel Noise Control

Preventing insufficient braking force in wading conditions by strategic use of surface texture on brake discs

A numerical simulation of wheel spray for simplified vehicle model based on discrete phase method

Numerical investigation of vehicle wading based on an entirely particle-based three-dimensional SPH model

RESEARCH ON DRAG REDUCTION CHARACTERISTICS OF UNDERWATER VEHICLE FORE REGION WITH SHORT GROOVE STRUCTURES

Study on the wheel/rail adhesion characteristic under water and oil conditions by using mixed lubrication model

Drag reduction design and research of high-speed amphibious vehicle’s deformable track wheels

Evaluation of Vehicle Braking Performance on Wet Pavement Surface using an Integrated Tire-Vehicle Modeling Approach

Aerodynamics of isolated cycling wheels using wind tunnel tests and computational fluid dynamics

Influence of structure and material on the vibration modal characteristics of novel combined flexible road wheel

Study on the Mechanism of Wheel Asymmetric Wear of Heavy-Haul Freight Vehicles

Numerical investigation of passive control flow to improve tire hydroplaning performance using a V-riblet non-smooth surface

Effect of Aircraft Tire Wear on Water Spray and Water Displacement Drag

Assessing braking performance on wet-road through water-depth estimation and vehicle-pavement dynamic simulation

Numerical simulation of effect of bionic V-riblet non-smooth surface on tire anti-hydroplaning

Numerical study of wheel–rail adhesion performance of new-concept high-speed trains with aerodynamic wings

Numerical Investigation of Erosion Wear Characteristics of Hydraulic Spillway

Improved Design, Development and Field Investigation of the Wheel-Soil Interaction Measurement System under Aircraft Load

Wheel/rail dynamic interaction induced by polygonal wear of locomotive wheels

Materials Selection and Structural Analysis of Plastic Tire with Wheel Spokes