Abstract:The hysteresis of rubber materials due to deformation and viscoelasticity is the main reason for the heat build-up (HBU) and rolling resistance (RR) of the rolling tire. It is important to realize the high precision prediction of HBU and RR of tire for the optimal design of high-performance fuel-saving tire. In this work, a thermo-mechanical coupling method based on Endurica and Abaqus co-simulation was used to predict the steady-state temperature distribution and RR of three finite element models (Lagrangian–Eulerian model, Lagrangian model, and Plane Strain model) of the solid tires under different loads and rotating speeds. The simulation results were compared with the experimental results. The Kraus self-heating model was utilized in the thermo-mechanical coupling method, which realized the quantitative relationship between the dynamic loss modulus of rubber and the loading conditions (temperature, strain, and strain rate). Special attention was paid to the determination of the material parameters in the Kraus self-heating model. The comparison between simulation results and experimental results shows that the Lagrangian model had the highest prediction accuracy, and the average prediction errors of the steady-state surface temperature and RR under three loading conditions were 3.4% and 7.9%, respectively. The Lagrangian–Eulerian model came in the second with average errors of 9.7% and 11.1%, respectively. The Plane Strain model had the worst prediction accuracy, with the average errors of 21.4% and 44.6%, respectively. In terms of the simulation time, the Plane Strain model had the lowest cost, and the average calculation time was 1143 s. The Lagrangian–Eulerian model took the second place, with an average calculation time of 2621 s. The Lagrangian model had the highest computation cost, with an average time of 5597 s. The comparison between the simulation results and the experimental results verified the effectiveness of the thermo-mechanical coupling analysis method. The methods of three finite element models of the solid tires in this work can provide some reference for the optimization design of elastomeric components (Lagrangian model), pneumatic tires (Lagrangian–Eulerian model), and non-pneumatic tires (Plane Strain model).

Numerical investigation of passive control flow to improve tire hydroplaning performance using a V-riblet non-smooth surface

Numerical simulation of effect of bionic V-riblet non-smooth surface on tire anti-hydroplaning

Design of Nonsmooth Groove Tire Bioinspired by Shark-Skin Riblet Structure

An algorithm for estimating the ultimate speed of vehicles on wet roads

Emergency Braking Control Strategy for High Speed Electric Drive Tracked Vehicle

Explicit Dynamic Analysis of Hydroplaning for Tire with Complex Tread Pattern

Evaluation of Vehicle Braking Performance on Wet Pavement Surface using an Integrated Tire-Vehicle Modeling Approach

Optimal allocation of tire force based on vehicle stability

Research on simplified tire finite element modeling and simulation method

Investigation of surface textures deterioration on pavement skid-resistance using hysteresis friction models and numerical simulation method

On Interfacial Deformation and Resistance Characteristics over Superhydrophobic Surfaces: A Numerical Study

Evaluation of Shear Stress Transport, Large Eddy Simulation and Detached Eddy Simulation for the Flow around a Statically Loaded Tire

A Prediction of Drag Reduction by Entrapped Gases in Hydrophobic Transverse Grooves

Application and Optimization of Drag Reduction Characteristics on the Flow Around a Partial Grooved Cylinder by Using the Response Surface Method

Numerical analysis on tractive performance of off-road tire on gravel road using a calibrated finite element method–discrete element method model and experimental validation

Assessing braking performance on wet-road through water-depth estimation and vehicle-pavement dynamic simulation

Computational Studies On Drag Reduction Effect By Surface Grooves

Drag Reduction by Microvortexes in Transverse Microgrooves

Study of the tire wear of virtual track train

A novel absolute nodal coordinate formulation thin plate tire model with fractional derivative viscosity and surface integral-based contact algorithm

Heat Build-Up and Rolling Resistance Analysis of a Solid Tire: Experimental Observation and Numerical Simulation with Thermo-Mechanical Coupling Method