Computational Studies On Drag Reduction Effect By Surface Grooves

Haosheng Chen,Yongjian Li
2009-01-01
Abstract:The drag reduction effect caused by the periodic surface grooves were studied using computational fluid dynamic method in two different flow conditions: laminar flow in a slide-disk interface, and turbulent flow on the grooved surface immerged in water.In the first part, the drag results by Reynolds equation that is commonly used in lubrication calculation is compared with the CFD result based on Navier-Stokes equation. It was validated that the Reynolds equation is not suitable when the groove depth is higher than 10% of the interface distance. Then, the drag forces on the surface with transverse and longitudinal grooves are calculated using CFD method. It was found that the 'side wall' effect causes the drag reduction, which means the drag reduction would appear when the loss of the drag on the groove's bottom can not be compensated by the pressure drag or the viscous drag on the side walls of the grooves.In the second part, the drag force on the transverse rectangular grooves in turbulent flow is analyzed based on the RANS equations coupled with the RNG k-epsilon turbulent model. It was found that the pressure drag force makes up a large proportion of the total drag, and the turbulent vortex structure in the grooves affects the drag characteristic of the surface. The 'side wall' effect also functions in turbulent flows, and the drag reduction is determined by the synthesized effect of the reduction of viscous drag and the increment of pressure drag.
What problem does this paper attempt to address?