Abstract:In this article, we present AlGaN/GaN-based lateral Schottky barrier diodes (SBDs) on sapphire substrate with fully recessed anodes and a <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\vphantom{_{\int}}$</tex-math> </inline-formula> high-permittivity field plate (FP). A specific ON-resistance of 3.2 m <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\Omega$</tex-math> </inline-formula> <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\cdot$</tex-math> </inline-formula> cm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$^{\text{2}}$</tex-math> </inline-formula> , an on/off current ratio of 10 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$^{\text{10}}$</tex-math> </inline-formula> , and a reverse breakdown voltage (BV) of 2.5 kV are simultaneously achieved for the device with the anode-to-cathode space of 30 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu$</tex-math> </inline-formula> m. This yields a Baliga’s power figure-of-merit (BFOM) of 1.95 GW/cm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$^{\text{2}}$</tex-math> </inline-formula> . Our fabricated device shows that the leakage current is hardly affected by the reverse bias. It is because the electric field is pushed apart from the Schottky contact region by the high-permittivity FP. This causes the absence of the defect-related carrier tunneling effect at the Schottky contact region. Meanwhile, the high-permittivity FP helps extend the depletion effect for the drift region and gives rise to the increased BV.

Improving the Performance of Deep Recessed Anode AlGaN/GaN Schottky Barrier Diode by Post Etching Treatment

Fluorine Plasma Treatment Induced Deep Level Traps and Their Effect on Current Transportation in Al0.83in0.17n/Aln/Gan Schottky Barrier Diodes

Simulation Optimization of AlGaN/GaN SBD with Field Plate Structures and Recessed Anode

Performance Recovery of p‐GaN Etch‐Induced Degradation via Atomic Layer Deposition In Situ N2 Plasma and Postanneal‐Assisted Passivation

2.5-kV AlGaN/GaN Schottky Barrier Diode on Silicon Substrate with Recessed-anode Structure

Influence of dry-etching damage on the electrical properties of an AlGaN/GaN Schottky barrier diode with recessed anode*

Improving the GaN-on-GaN Schottky Barrier Diode by ALD-AlN Tunneling Barrier Layer and Multi-Fins Structure

Improved Schottky Barrier Characteristics for AlInN/GaN Diodes by Oxygen Plasma Treatment

On the coupled effect of a MIS-based anode and AlGaN-polarized super-junction to reduce the local electric field for AlGaN/GaN Schottky barrier diodes

3.4-kV AlGaN/GaN Schottky Barrier Diode on Silicon Substrate With Engineered Anode Structure

2.7-Kv Algan/Gan Schottky Barrier Diode On Silicon Substrate With Recessed-Anode Structure

2.5 Kv/1.95 GW/cm2 AlGaN/GaN-Based Lateral Schottky Barrier Diodes with a High-k Field Plate to Reduce Reverse Current

Improvement on Leakage Current for High Al-content AlGaN Schottky Diode by Fluoride-based Plasma Treatment

Enhanced Performance of GaN Schottky Barrier Diodes by Oxygen Plasma Treatment

Low ON-Resistance GaN Schottky Barrier Diode with High V-ON Uniformity Using LPCVD Si3N4 Compatible Self-Terminated, Low Damage Anode Recess Technology

2.5 kV/1.95 GW/cm<inline-formula> <tex-math notation="LaTeX">$^{\text{2}}$</tex-math> </inline-formula> AlGaN/GaN-Based Lateral Schottky Barrier Diodes With a High-<italic>k</italic> Field Plate to Reduce Reverse Current

Recess-free thin-barrier AlGaN/GaN Schottky barrier diodes with ultra-low leakage current: Experiment and simulation study

Recessed AlGaN/GaN Schottky Barrier Diodes With TiN and NiN Dual Anodes

Optimization of Mesa Etch for a Quasi-Vertical GaN Schottky Barrier Diode (SBD) by Inductively Coupled Plasma (ICP) and Device Characteristics

Pulsed N2 Plasma Surface Treatment for AlGaN/GaN HEMTs Prior to PECVD SiNx Passivation to Reduce Plasma Damage

GaN Lateral Schottky Diodes with High Baliga's Figure-of-Merit Utilizing Self-Terminated, Low Damage Anode Recessing Technology.