Abstract:Compared with conventional light-emitting diode (LED), micro-LED has excellent photo-electric properties such as high current density, light output power density, light response frequency. It has widespread application prospects in the field of light display, optical tweezers, and visible light communication. However, dry etching inevitably leads the sidewall to be damaged, which results in the degradation of device properties. In this letter, a micro-LED array device based on F ions implantation isolation technology is presented to avoid damaging the sidewall. We systemically investigate the influence of fluorine ion implantation energy and light-emitting apertures on the photoelectric properties of the micro-LED array device by testing the current-voltage characteristic and light output power. The investigation results show that comparing with F ion 50 keV single implantation device, the reverse leakage of 50/100 keV double implantation device decreases by 8.4 times and the optical output density increases by 1.3 times. When the light-emitting apertures are different (6, 8, 10 μm respectively), the reverse leakage current remains constant, and the forward operating voltage decreasesfrom 3.3 V to 3.1 V and to 2.9 V with the increase of the aperture. Besides, the available area ratio, i.e. the ratio of actual light-emitting area to device area of single micro-LED with different light-emitting apertures are 85%, 87%, and 92%, respectively. The electrical isolation of the micro-LED array is realized by ion implantation isolation technology, and the micro-LED has some advantages over the conventional mesa etching micro-LED device, such as low reverse leakage current density, high optical output power density, and high effective light-emitting area ratio.

High-Power Flip-Chip Monolithically integrated Light-Emitting diodes: Based on Self-Isolation Technology

A High-Voltage LED Driver Using SOI Technology

High-voltage LED Driver Based on SOI Process

Analysis of thermal spreading resistance in high power LED package and its design optimization

A New Double Epitaxial Layer Dielectric Isolation Technology For Hvics

Monolithic Integrated Balanced Photodiodes with Improved Electrical Isolation

Analysis and Modeling of Thermal-Electric Coupling Effect of High-Power Monolithically Integrated Light-Emitting Diode

Study on different isolation technology on the performance of blue micro-LEDs array applications

Junction temperature and reliability of high-power flip-chip light emitting diodes

Deep Insight of Self-Heating Effect Induced Hot Carrier Reliability Improvement in LDMOS Devices

Silicon based wafer-level packaging for flip-chip LEDs

Monolithic Integration of Deep Ultraviolet LED with a Multiplicative Photoelectric Converter

Monolithic On-chip Magneto-optical Isolator with 3 Db Insertion Loss and 40 Db Isolation Ratio

Ion implantation isolation based micro-light-emitting diode device array properties

Wafer-Level Light Emitting Diode (WL-LED) Chip Simplified Package for Very-High Power Solid-State Lighting (SSL) Source

Thermal enhancement of optical-thermal-electrical isolation package structure for UVA LEDs

Experiments of A Novel 3-D Charge Balanced Self-Shielding Isolation Technology for High-Voltage Integrated Circuits

Experimental Results on Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

Monolithic High-Performance Micro-Leds Using Planar-Geometry Pixelation Process for High-Resolution Micro-Display Applications

Numerical and experimental investigation on a novel high-voltage (>600-V) SOI LDMOS in a self-isolation HVIC

A 3 W High-Voltage Single-Chip Green Light-Emitting Diode with Multiple-Cells Network