Abstract:The purpose of this study is to change the surface reflectivity of organic/inorganic hybrid silicon to increase light trapping by using CH3COONa as an etchant solution. The etching procedure is a simple and convenient way to increase light trapping to accomplish this goal. This paper reports on the surface topography of (100) P-type organic/inorganic hybrid silicon wafers modified by etching a controllable pyramid structure on the surface. Sodium acetate anhydrous (CH3COONa) solution was used to etch the silicon surface, with the concentration ratio of CH3COONa varying in the range of 22-38 wt.% ( +/- 0.12 wt%) and 3.5 +/- 0.1 wt of isopropyl alcohol (IPA) in a temperature range of 60-75 degrees C +/- 0.1 degrees C. By enhancing light trapping and absorption, texturization can effectively reduce the surface reflection and improve equipment performance. Texturization time ranges from 25 to 45 min during etching, while the SEM images per case are used to calculate the mean and standard deviation of the pyramid height. The etching solution is studied with respect to the reflectivity, wetting, and surface morphology of silicon wafers. The experimental results show that the optimal etching conditions are a sodium acetate anhydrous (CH3COONa) solution of 22 +/- 0.12 wt.% with IPA of 3.5 +/- 0.1 wt% for 45 min at a temperature of 75 degrees C. Therefore, from the results, it was noted that the size of the pyramids generated under this condition was 1.75 +/- 0.2 mu m. Correspondingly, from the results, surface reflectivity of 12 +/- 0.12% was observed under optimal conditions with wavelength in the the range of 450-900 nm. The results reveal that surface reflectivity modification is an effective way to control light trapping. The potential of this etching solution is well documented and paves the way for the manufacture of an efficient and low-photovoltaic device.

RETRACTED ARTICLE: Fabrication of Highly Efficient Random Pyramids on Silicon Substrate by Employing CH3COONa As Texturing Solution for Organic-Silicon Hybrid Solar Cells

Investigations Of Random Pyramid Texture On The Surface Of Single-Crystalline Silicon For Solar Cells

Reflectivity of porous-pyramids structured silicon surface

Orthogonal Experimental Optimization of Surface Texturization of Monocrystalline Silicon for Solar Cell

Nano-Texturing of Single Crystalline Silicon Via Cu-Catalyzed Chemical Etching

Pyramidal texturing of silicon surface via inorganic–organic hybrid alkaline liquor for heterojunction solar cells

Ultrafast Random‐Pyramid Texturing for Efficient Monocrystalline Silicon Solar Cells

Research on Monocrystalline Silicon Surface Etching

Chain pyramid texturization for better light trapping and efficiency of silicon solar cells

Highly Efficient and Less Time Consuming Additive Free Anisotropic Etching of Silicon Wafers for Photovoltaics

Pyramid‐Textured Antireflective Silicon Surface In Graphene Oxide/Single‐Wall Carbon Nanotube–Silicon Heterojunction Solar Cells

The 18.3% Silicon Solar Cells with Nano-Structured Surface and Rear Emitter

Highly-efficient low cost anisotropic wet etching of silicon wafers for solar cells application

TEXTURIZATION OF MONOCRYSTALLINE SILICON FOR SOLAR CELLS

Inverted random nanopyramids patterning for crystalline silicon photovoltaics

Surface Texturing of Silicon Wafers by Two-step Ag-assisted Etching Process with New NSR Solution

Formation of Various Pyramidal Structures on Monocrystalline Silicon Surface and Their Influence on the Solar Cells

Improving Performance of Organic-Silicon Heterojunction Solar Cells Based on Textured Surface Via Acid Processing

Rapid anisotropic chemical etching for quick formation of novel octagonal pyramids on silicon surface for photovoltaics

Effect of Nucleating Agents on Crystalline Silicon Textured Structure: from Upright Pyramid to Analogous Inverted Pyramid

One-step Cu-assisted chemical etching at room temperature of inverted pyramid array for high-performance crystalline silicon solar cells