Optimization of Device Dimensions of High-k Gate Dielectric Based DG-TFET for Improved Analog/RF Performance
Shubham Tayal,Goyal Vibhu,Shweta Meena,Ravi Gupta
DOI: https://doi.org/10.1007/s12633-021-01127-y
IF: 3.4
2021-05-03
Silicon
Abstract:The optimization of device dimensions along with high-k gate dielectric is investigated in this work for improving RF/analog performance of double gate (DG) TFET device. Through simulation, it is seen that RF/analog performance of DG-TFET deteriorate by the use of high-k gate materials in place of SiO2 as gate oxide. It has been anticipated that this degradation (ΔFoM = FoM(k = 3.9) – FoM(k = 40)) can be abated by optimizing the device dimensions particularly the channel thickness (Tc) and length (Lc). It is seen that deprivation in intrinsic dc gain (ΔAV), cut –off frequency (ΔfT), maximum oscillation frequency (ΔfMAX), gain-frequency product (ΔGFP), transconductance-frequency product (ΔTFP), and gain-transconductance-frequency product (ΔGTFP) is 11.3%, 11.84%, 11.17%, 52.16%, 19.69% & 56.42% respectively for Tc = 12 nm and 32.6%, 10.96%, 12.8%, 59.58%, 14.61% & 61.24% respectively for Tc = 6 nm. Furthermore, it is seen that deprivation in RF/analog parameters as a result of high-k gate dielectrics varies with channel length (Lc). The ΔAV, ΔfT, ΔfMAX, ΔGFP, ΔTFP, and ΔGTFP is observed to be 32.6%, 10.96%, 12.8%, 59.58%, 14.61% & 61.24% respectively for Lc = 30 nm and 17.2%, 7.41%, 10.36%, 58.67%, 8.95% & 59.36% respectively for Lc = 15 nm. Consequently, high-k gate dielectrics-based DG-TFET should be designed at thicker Tc and lower Lc for improved analog/RF performance of TFET device.
materials science, multidisciplinary,chemistry, physical