Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Performance-based risk assessment of reinforced concrete bridge piers subjected to vehicle collision

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Vehicle Collision with Reinforced Concrete Columns Wrapped with Fiber-Reinforced Polymer Composites

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Review of Studies on Vehicle Anti-collision on Bridge Piers

Fragility assessment of RC bridge piers subjected to vehicle collision based on residual load-bearing capacity

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Damage evaluation and performance-based design of double-pier RC bridge subjected to vehicle collision

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Performance-based Design for Improving Impact Resistance of RC Bridge Piers with CFRP Grid-Reinforced ECC

Experimental and numerical study on impact resistance of RC bridge piers under lateral impact loading

Response and Shear Mechanism of RC Bridge Piers Confined with CFRP Grid-Reinforced ECC Subjected to Truck Collision

Reliability assessment and sensitivity analysis of vehicle impacted reinforced concrete circular bridge piers

Dynamic response performance of bridge piers under non-bottom vehicle collision

Damage characterization and resilience optimization of reinforced concrete bridge piers under vehicle impact

Study on the Performance of Energy Absorption Structure of Bridge Piers Against Vehicle Collision

Reliability analysis and uncertainty evaluation for assessing low velocity car impacted cosmetic damage of prototyped RC bridge pier

Crashworthiness Design of GFRP Bar Reinforced Concrete Bridge Pier Subjected to Truck Collision

Performance of precast concrete bridge piers with grouted sleeve connections against vehicle impact

Experimental Testing and Numerical Simulations of Ship Impact on Axially Loaded Reinforced Concrete Piers

Vehicle-Impact Damage of Reinforced Concrete Bridge Piers: A State-of-the Art Review