Abstract:A building may be subjected to a variety of accidental loads during its service life. Partially precast concrete (PC) beams are a primary structural component. Their impact resistance can have a substantial impact on the overall safety of a structure when it is subjected to an impact load. In this study, numerical analyses were performed on the dynamic response of PC beams strengthened with bonded steel plates subjected to impact loading. The model was verified from four aspects: energy conversion, failure form, impact force–time history curve, and midspan displacement–time history curve. The dynamic response eigenvalues of the peak impact force, peak midspan displacement, and residual midspan displacement were compared between the numerical simulations and experimental tests. The relative inaccuracy of the peak impact force ranged from 9.51% to 14.0%, with an average value of 11.9%. The average relative error for the midspan displacement was −0.09%, with the greatest relative errors varying between −0.64% and 0.3%. The residual value errors of the midspan displacement ranged from −0.95% to 2.38%, with an average relative error of 0.94%. On this basis, the effects of the impact mass, impact height, width, and length of the bonded steel plate on the impact resistance of the components were evaluated. Furthermore, the differences in the equivalent plastic strain contours, impact force–time history curves, and midspan displacement–time history curves under different parameters were compared. The results demonstrated that the failure modes and flexural deformations of the test beams were influenced by the impact mass and impact height. The increase in the length and width of the steel plate had no effect on the impact force response, but the peak and residual values of the midspan displacement decreased, which could significantly increase the impact resistance of the beams. Lastly, the impact mass m, the impact height h, the thickness t of the bonded steel plate, the length of the bonded steel plate hs, and the width of the bonded steel plate bs were all taken into account in the fitting formula. These five parameters were used to predict the peak impact force response, the peak value of the midspan displacement, and the residual value of the midspan displacement. The results demonstrated that the fitting formula had small errors and could accurately reflect the dynamic responses of the PC beams strengthened with bonded steel plates under impact loading.

Performance of precast concrete bridge piers with grouted sleeve connections against vehicle impact

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Vehicular impacts on precast concrete bridge piers with grouted sleeve connections

Research on the Factors Influencing the Seismic Performance of Grouting Sleeve Assembled Double-Column Piers

Seismic performance of precast piers connected by grouted splice sleeve with Central-tenon enhancement: experimental validation and system-level fragility study

Vehicular impact resistance of highway bridge with seismically-designed UHPC pier

Dynamic response performance of bridge piers under non-bottom vehicle collision

Research on the Seismic Performance of Prefabricated Bridge Piers Using UHPC Grout under an Eccentric Load

Impact Resistance Performance and Damage Characteristics of Mortise-and-Tenon Joint Prefabricated Bridge Piers

Numerical and Analytical Investigations of the Impact Resistance of Partially Precast Concrete Beams Strengthened with Bonded Steel Plates

Experimental Tests and Numerical Simulations of Circular Reinforced Concrete Piers under Ship Impact

Experimental and numerical study on impact resistance of RC bridge piers under lateral impact loading

Shear Behavior of Epoxy Joints in Precast Segmental Bridges under Impact Loading

Investigation of the performance of grouted couplers in vehicle impacted reinforced concrete ABC bridge piers

Seismic Performance of FRP-Confined Precast Assembled Concrete Piers: An Experimental Study

Shaking table test on single segment prefabricated concrete bridge pier connected by grouting sleeve

Three-dimensional finite element analyses for cyclic responses of precast segmental bridge piers accounting for bond-slip degradation

Reinforced concrete bridge structures under barge impacts: FE modeling, dynamic behaviors, and UHPFRC-based strengthening

Experimental Study on Failure Mode of Precast Assembled Segmental Beams under Impact Loading