Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Experimental Tests and Numerical Simulations of Circular Reinforced Concrete Piers under Ship Impact

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Experimental Testing and Numerical Simulations of Ship Impact on Axially Loaded Reinforced Concrete Piers

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Experimental and numerical study on impact resistance of RC bridge piers under lateral impact loading

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Numerical simulation analysis of dynamical performance of equipment protecting from ship-bridge collision

The Assessment of the Resistance to Ship Impact Capability of Wu Songjiang Bridge Piers

Experiment of Bearing Performance of Main Pier of Shijiu Lake Bridge Subjected to Ship Collision Load

Assessment of Ship Impact Capacity and Study of Anti-Impact Scheme for Piers of First Zhuzhou Xiangjiang River Bridge

Experimental and Numerical Analysis of Reinforced Concrete Columns under Lateral Impact Loading

A review on the assessment methods of bridge against ship collision

Experimental Research and Finite Element Analysis of Bridge Piers Failed in Flexure-Shear Modes

Impact behavior of a strengthened bridge substructure under scour and vessel collision

Dynamic response performance of bridge piers under non-bottom vehicle collision

Reinforced concrete bridge structures under barge impacts: FE modeling, dynamic behaviors, and UHPFRC-based strengthening

Nonlinear numerical analysis and progressive damage assessment of a cable-stayed bridge pier subjected to ship collision