Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Damage evaluation and performance-based design of double-pier RC bridge subjected to vehicle collision

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

A Method for Controlling Seismic Damage of RC Bridge Piers Subjected to Strong Aftershocks

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

General Reduced Vehicle Model for Simulating Truck-Bridge Pier Collisions

Shear Capacity of an Existing RC Bridge Deck Slab: FE Analysis Using Continuum Elements

Review of Studies on Vehicle Anti-collision on Bridge Piers

Experimental and numerical study on impact resistance of RC bridge piers under lateral impact loading

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Dynamic response performance of bridge piers under non-bottom vehicle collision

Vehicular impact resistance of highway bridge with seismically-designed UHPC pier

Damage characterization and resilience optimization of reinforced concrete bridge piers under vehicle impact

Damage Analysis of Box Girder Based on a Vehicle–Bridge Interaction System

Reliability assessment and sensitivity analysis of vehicle impacted reinforced concrete circular bridge piers

Experimental Tests and Numerical Simulations of Circular Reinforced Concrete Piers under Ship Impact

Experimental Testing and Numerical Simulations of Ship Impact on Axially Loaded Reinforced Concrete Piers

Improved bridge capacity rating methods based on system reliability assessment

Impact resistance of bridge columns with energy-absorbing crash dampers under vehicle collisions

Performance-based reliability analysis of bridge pier subjected to vehicular collision: Extremity and failure

Reinforced concrete bridge structures under barge impacts: FE modeling, dynamic behaviors, and UHPFRC-based strengthening