Abstract:Bridge columns made of normal concrete are evidenced to be susceptible to vehicle collisions. Particularly in the United States, vehicle collision has become one of the primary causes of bridge failures. This is largely due to the low crashworthiness of a conventional reinforced concrete (RC) column. Ultra-high-performance fiber-reinforced concrete (UHPFRC) as one of advanced concrete materials has been experimentally demonstrated to possess excellent strength, durability, impact resistance and energy-absorbing capacity. Accordingly, one type of UHPFRC-strengthened columns was proposed in this study as an alternative to RC columns that may be at risk for vehicle collision incidents. High-resolution finite element (FE) models were developed to investigate the performance of UHPFRC-strengthened columns subjected to vehicle collisions. In the high-resolution FE model, a three-span simply-supported girder bridge (including girder, pier column, column cap, bearing, etc.) was adopted and modelled. Material models regarding normal concrete and UHPFRC as well as the vehicle model were carefully calibrated by experimental data. The influence of initial gravity loads on impact responses was found to be pronounced, and a damping-based method was proposed to efficiently exert permanent loads on pier columns prior to a collision. Three different simplified models, as published in current studies, were investigated to replace the whole bridge model. Two single-column models with different boundaries were shown to have low accuracy. The pier-bent model considering the superstructure gravity was demonstrated as capable of predicting collision-induced responses that are in good agreement with the high-resolution FE model. The impact resistances of both RC and UHPFRC-strengthened columns were extensively investigated using the appropriate simplified model. The crashworthiness of UHPFRC-strengthened column was found to be considerably superior to that of RC column. An extensive parametric study was performed using response surface methodology to explore the influences of reinforcement ratios, thickness of UHPFRC jacket, UHPFRC strength and initial impact speed. The impact-resistant performance is mostly sensitive to changes in the thickness of UHPFRC jacket when the impact speed is not very high. On the contrary, the residual capacity of the bridge column is hardly increased by thickening UHPFRC jacket. In addition, the developed response surface models provided easy estimation of impact-induced responses of an UHPFRC-strengthened column, which have potential use as the surrogates of time-consuming FE simulations to efficiently examine the reliability and optimization of bridge columns under impact loadings.

Fragility assessment of RC bridge piers subjected to vehicle collision based on residual load-bearing capacity

Machine Learning-based Seismic Fragility Curves for RC Bridge Piers

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Fragility Analysis and Resilience Assessment of the Single-Column Pier Steel-Concrete Composite Bridge Subjected to Seismic Loads

Assessing the Response and Fragility of Concrete Bridges under Multi-Hazard Effect of Vessel Impact and Corrosion

Performance-based risk assessment of reinforced concrete bridge piers subjected to vehicle collision

A fragility-based framework for identification of unfavorable impact location for bridge columns under barge collisions

Performance and Sensitivity Analysis of UHPFRC-strengthened Bridge Columns Subjected to Vehicle Collisions

Damage evaluation and performance-based design of double-pier RC bridge subjected to vehicle collision

Reliability assessment and sensitivity analysis of vehicle impacted reinforced concrete circular bridge piers

Dynamic response performance of bridge piers under non-bottom vehicle collision

A Rapid Procedure To Seismic Fragility Assessment On Residual Displacement For Rc Bridge Pier

Experimental and numerical study on impact resistance of RC bridge piers under lateral impact loading

Vehicular Impact Resistance of FRP-Strengthened RC Bridge Pier

Reliability analysis and uncertainty evaluation for assessing low velocity car impacted cosmetic damage of prototyped RC bridge pier

Seismic Fragility Analysis of Reinforced Concrete Simply Supported Girder Bridges Resting on Double-Column Piers for High Speed Railway

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Dynamic Responses and Reliability Analysis of Bridge Double-Column under Vehicle Collision

Bridges in a changing climate: Fragility-based approach for evaluating the time-variant performance of bridges subjected to heavy vehicle collisions

Assessment on Concrete Constitutive Models for Numerical Simulations of Vehicular Collisions with RC Bridge Piers

Fragility Analysis of a Self-Anchored Suspension Bridge Based on Structural Health Monitoring Data