Abstract:Numerous bridges with piers over 40 m are constructed in Southwest China, which is known as a region of high seismicity. In current research, this type of bridge is commonly simplified as a single-column system, and researchers mainly focused on how seismic performance is affected by the higher modes of columns. This study aims to investigate the seismic behavior of the entire system of tall-pier bridges subjected to near-fault ground motions, using probability-based fragility analysis. A numerical model of the entire bridge system is constructed incorporating the effects of higher-order modes of pier columns and the influence of various structural components as bearings, shear keys, and end abutments. Both pier columns and rubber bearings are considered as vulnerable components during fragility analysis. With probability seismic demand models (PSDMs) developed from extensive nonlinear time history analyses, both component-level and system-level fragility curves of the prototype bridge are constructed and compared. The results show that bridge performance is usually dominated by rubber bearings, rather than pier columns, and the relative vulnerability of components might change with the intensity of input motions. This fact implies that only focusing on the seismic demands of pier columns, as is usual in current investigations, is insufficient in estimating the damage states of tall-pier bridges; failure of bearings should be carefully considered in engineering practice as well. Furthermore, compared with fragility curves of individual components, higher seismic vulnerability is observed in those corresponding to the entire system, indicating that the seismic fragility of tall-pier bridges should be assessed at the system level rather than component level.

Fragility Analysis and Resilience Assessment of the Single-Column Pier Steel-Concrete Composite Bridge Subjected to Seismic Loads

Machine Learning-based Seismic Fragility Curves for RC Bridge Piers

Fragility assessment of RC bridge piers subjected to vehicle collision based on residual load-bearing capacity

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Seismic Fragility of a Typical Bridge Using Extrapolated Experimental Damage Limit States

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Fragility Analysis of a Self-Anchored Suspension Bridge Based on Structural Health Monitoring Data

System Fragility Assessment of Tall-Pier Bridges Subjected to Near-Fault Ground Motions

Seismic Resilience Assessment of the Hybrid Bridge Pier Based on Fragility Analysis

Seismic Fragility Analysis of Reinforced Concrete Simply Supported Girder Bridges Resting on Double-Column Piers for High Speed Railway

Seismic Fragility Analysis of Multispan Continuous Girder Bridges with Varying Pier Heights considering Their Bond-Slip Behavior

Analysis on the Time-Varying Fragility of Offshore Concrete Bridge

Analysis on Seismic Fragility of Landscape Covered Bridge Considering Bridge-building Interaction

DAMAGE FRAGILITY ANALYSIS FOR HIGH-PIER AND LONG-SPAN CONTINUOUS RIGID FRAME BRIDGE UNDER SCENARIO EARTHQUAKES

Seismic Fragility of a Multi-Frame Box-Girder Bridge Influenced by Seismic Excitation Angles and Column Height Layouts

Seismic risk and resilience assessment of composite bridges using hybrid fragility

Seismic Fragility Estimation of Corroded Reinforced Concrete Girder Bridges

Seismic Vulnerability Analysis of Long-Span Multi-tower Suspension Bridge

Seismic vulnerability analysis of regular continuous girder bridges

Influence of Seismic Reinforcement on Fragility of Old Simply Supported Bridge