Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

A Light-Weight Timing Resilient Scheme for Near-Threshold Efficient Digital ICs

Noise-aware DVFS Transition Sequence Optimization for Battery-Powered IoT Devices.

Negative Design Margin Realization through Deep Path Activity Detection Combined with Dynamic Voltage Scaling in a 55 nm Near-Threshold 32-Bit Microcontroller

Eliminating Timing Errors Through Collaborative Design to Maximize the Throughput

A Light-Weight Energy-Efficient Resilient Circuit for Variation Tolerance

Ultra Low Overhead Error Mask Flip-Flop in Near Threshold Voltage Processor Design

Timing error resilient clock gate design for wide-voltage application

A Timing-Aware Configurable Adder Based on Timing Detection for Low-Voltage Computing

Margin Elimination Through Timing Error Detection in a Near-Threshold Enabled 32-bit Microcontroller in 40-nm CMOS

MPAM: Reliable, Low-Latency, Near-Threshold-Voltage Multi-Voltage/Frequency-Domain Network-on-Chip with Metastability Risk Prediction and Mitigation

Error-Resilient Integrated Clock Gate for Clock-Tree Power Optimization on a Wide Voltage IOT Processor

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Low-power level converting flip-flop with a conditional clock technique in dual supply systems.

A Variation-Tolerant Near-Threshold Processor with Instruction-Level Error Correction

Improving performance in near-threshold circuits using 3D IC technology

Near-Threshold Sram Design On 40-Nm Cmos Technology For Low Power Design

A Near Threshold Error Resilient Processor Based on Dynamic Timing Error Prediction and Within-a-cycle Timing Error Correction

TICA: A 0.3V, Variation-Resilient 64-Stage Deeply-Pipelined Bitcoin Mining Core with Timing Slack Inference and Clock Frequency Adaption

Improving Performance under Process and Voltage Variations in Near-Threshold Computing Using 3D ICs

DSC-TRCP: Dynamically Self-Calibrating Tunable Replica Critical Paths Based Timing Monitoring for Variation Resilient Circuits