Abstract:Material response and the launch of laser plasma during the 1064 nm nanosecond laser pulse induced damage to the exit surface of fused silica are investigated. Employing a polarization-based two-frame shadowgraphy setup with ～ 60 fs probing resolution, the transient material responses from the rising part of nanosecond pumping pulse to several hundred nanosecond timescale are captured. Using a shearing interferometry setup, the evolution of transient phase shift of laser plasma in the expansion process to the ambient air is also investigated. Inhomogeneous distribution of phase shift caused by the electrons and neutrals in the plasma is quantitatively resolved by employing the fast Fourier transform based filtering algorism. To demonstrate the evolutions of important plasma parameters such as pressure, temperature and density, a continuum hydrodynamic model is numerically solved. The initial pressure of plasma is estimated according to the point-explosion model, and the initial plasma temperature is achieved by calculating the difference between simulating shockwave front radius and experimental value at the same delay. The optimal temperature is chosen when the radius difference is minimal. Main conclusions are as follows. 1) Abundant suprathermal electrons are excited in the early energy deposition process. Part of these electrons contribute to the thermal transport process and produce the laser supported solid-state absorption front (LSSAF) which propagates into the bulk silica. Other electrons escape to the air side and contribute to the formation of air plasma through the impact ionization process. Plasma expansion speed is about 20 km/s during this phase. 2) When the pump pulse is terminated, the LSSAF and air plasma lose their energy supplied and experience a rapid decline of the temperature and expansion velocity. As a result, the final damage crater depth exhibits seldomly no increase compared with the transient crater depth during this phase. Hot bulk plasma formed in this phase becomes the damage precursor and induces the ejection of abundant neutrals probably due to the phase explosion mechanism. Inhomogeneous distribution of stress is formed by Rayleigh-Taylor instability at the interface between hot bulk plasma and surrounding bulk material during the expansion of LSSAF. Radial and circumferential cracks are formed due to the release of stress. 3) Evolution of air plasma follows the conventional evolution process of laser-induced plasma, i. e. , internal pressure, temperature and density decrease quickly with time delay. The simulated transient highest pressure is about 600 MPa. Simulation also predicts the formation of the internal shockwave. Our work will be helpful in understanding the laser damage mechanism of the fused silica optical window.

Kilowatt Laser-Induced Thermal Damage in High-Purity Silica Fiber by Pulsed Laser at 1064 Nm

Laser-induced Damage Threshold Analysis of High-Purity Silica Fiber Based on Thermal Effects

Laser-induced damage threshold based on thermal effects in high-purity silica optical fiber

Characterization of laser damage performance of fused silica using photothermal absorption technique

The Photo-Thermal Absorbing Influence on Introducing Laser-Damaging of the Fused Silica

Analysis of Laser-induced Damage Threshold of Silica Optical Fiber Based on Finite Element Method

Bulk Damage and Stress Behavior of Fused Silica Irradiated by Nanosecond Laser

Experimental and Computational Study of Damage Pocess Induced by 1064 Nm Nanosecond Laser Pulse on the Exit Surface of Fused Silica

Laser Induced Damage in Fused Silica for 248 nm

Damage Induced 0n Fused Silica by Fundamental Frequency and Third Harmonic of Nd:YAG Laser

Numerical Simulation of Thermal Effect in Fused Silica Irradiated by Nanosecond High Repetition Rate Laser

Surface and bulk effects in silica fibers caused by 405 nm CW diode laser irradiation and means for mitigation

Damage Behaviors of Silica Microparticles on Fused Silica Optics under 355 Nm High Fluence Laser

Thermodynamic damage behavior of single-crystal MgF2 irradiated by high-power fiber laser

Research on the temperature and thermal stress of fused silica irradiated by a laser pulse

Laser Induced Damage Characteristics of Fused Silica Optics Treated by Wet Chemical Processes

Laser-induced Damage Growth of Fused Silica at 351 Nm on a Large-Aperture High-Power Laser Facility

Laser-Induced Damage Growth on Larger-Aperture Fused Silica Optical Components at 351 Nm

Behavior Analysis and Threshold Prediction of Laser-Induced Damage in Fused Silica Based on 2-D Thermal Diffusion Model

Damage Growth Characteristics on the Exit Surface of Fused Silica by the Low-Temporal Coherence Light Irradiation.

Numerical Simulation on Temperature and Stress of Pulsed Laser Repairing Fused Silica Defects