Abstract:The low-voltage electric machine (EM) is a core technology for transportation electrification, and features like high power density and compact volume are essential prerequisites. However, these requirements are usually in conflict with the reliability property of EM, especially in the safety-critical industry such as aviation. Therefore, an appropriate balance between high-performance and reliability needs to be found. Often, the over-engineering method is applied to ensure safety, although it might have a detrimental effect on the EM volume. To address this issue, the EM reliability assessment is included at the EM design stage through the physics of failure (PoF) theory. In EMs, the windings play a key role in electromechanical energy conversion, but their insulation system is subject to frequent failure and represents a reliability bottleneck. Therefore, in-depth research on the root causes of insulation breakdown is beneficial for EM reliability improvement purposes. Indeed, increasing awareness and knowledge on the mechanism of the insulation degradation process and the related lifetime modeling enables the growth of appropriate tools for achieving reliability targets since the first EM design steps. In this work, the main aspects of the insulation system, in terms of materials and manufacturing, are first reviewed. Then, the principal stresses experienced by the winding insulation system are deeply discussed with the purpose of building a profound understanding of the PoF. Finally, an overview of the most common insulation lifetime prediction models is presented, and their use for accomplishing the reliability-oriented design (RoD) and the remaining useful life (RUL) estimation are examined.

Moving Toward Partial Discharge-Free Design of Electrical Machines for More Electric Aircraft Applications

On the Design of Partial Discharge-Free Low Voltage Electrical Machines

Derivation of Ambient Enhancement Factors of Impregnated Twisted pairs for Partial Discharge Risk Evaluation

Robust Control of Winding-Based DC-Bus Capacitor Discharge for PMSM Drives in Electric Vehicles

Reliability vs. Performances of Electrical Machines: Partial Discharges Issue

Electrical Machine Design Considering Corona-Resistant Wire for More Electric Aircraft Applications

Lifetime Estimation of Corona-Resistance Wire for Electrical Machines Operating under the Partial Discharge Regime

Lifetime Model for Inverter-fed Electrical Machines Windings Including Thermal Aging and Partial Discharge Risk

Determination of Dominant Influencing Factors on Partial Discharge Inception Voltage

Insulation Design of a High Frequency Electrical Machine for More Electric Aircraft Propulsion

DC-Bus Capacitor Maximum Power Discharge Strategy for EV-PMSM Drive System with Small Safe Current

Effect of Test Voltage Waveforms on Partial Discharge Inception Voltage Considering Different Environmental Conditions

Temperature‐dependent partial discharge characteristics of high temperature materials at DC voltage for hybrid propulsion systems

Negative Medium-Voltage Direct Current Discharges in Air under Simulated Sub-Atmospheric Pressures for All-Electric Aircraft

Combined Effect of Short Rise Time and Relative Humidity on the Partial Discharge Inception Mechanism in Rotating Electrical Machines Insulation

Insulation for Rotating Low-Voltage Electrical Machines: Degradation, Lifetime Modeling, and Accelerated Aging Tests

Partial discharge theory and technologies related to medium-voltage electrical equipment

Time-to-Failure Analysis of Short-Duty Cycle, Inverter-Fed Electrical Machines Exposed to Prevailing Electrical Stress

A Review of Partial Discharge in Stator Winding of Rotating Machines Fed by Voltage Source PWM Motor Drives

Estimation of the Partial Discharge Inception Voltage of Electrical Asset Components at Variable Environmental Pressure: A Modelling Approach

Optimization and Analysis of a High Power Density and Fault Tolerant Starter–Generator for Aircraft Application