Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. Hybrid reinforcement of steel and fiber-reinforced polymer (FRP) bars can provide a balanced performance between strength, ductility, and durability for the concrete structures. Thus, this study evaluates the shear performance of hybrid Basalt-FRP/steel-RC beams without shear reinforcement. A total of twelve RC beams were cast and tested under four-point loading to study the influence of reinforcement type, reinforcement ratio of longitudinal bars and axial stiffness between FRP and steel ratio, [math] on the shear performance of the concrete beams. The test results were analyzed in terms of crack patterns, load-midspan deflection, load-crack width relationships, and shear strength of the tested beams. In addition, the experimental results were compared with the theoretical results obtained from various design codes and guidelines. Moreover, a finite element (FE) model was created, and the experimental results were used for validation of the FE model. The test results revealed that the beam specimens designed with similar effective reinforcement ratio exhibits comparable shear strength nevertheless the tensile reinforcement used. Experimental test results demonstrated that using hybrid bars increased the shear capacity of the beams by 11% compared to steel bars. Furthermore, the energy absorption of the hybrid-RC beams was enhanced by 16% compared to FRP-RC beams. By elevating the [math] ratio from 1.25 to 2.44, both the shear strength and energy absorption improved by approximately 10%. Notably, there was a significant decrease in the deflection and crack width of the hybrid-RC beams in comparison to the FRP-RC beams. The design codes ACI440.11-22 and CSA S806-12 displayed accurate enough estimates of the shear strength, while JSCE-1997 showed a conservative result.

Experimental Study on Shear Behaviors of Partial Precast Steel Reinforced Concrete Beams

Shear performance of deep partially precast high-strength steel reinforced UHPC T-beam: Experimental study and a novel shear model

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Experimental Research the Shearing Performance of Grading-Fiber Reinforced Reactive Powder Concrete

PLASTIC ANALYSIS OF SHEAR BEHAVIOR OF COMPOSITE STEEL-CONCRETE BEAMS

Probabilistic Code-Based Shear Capacity Model for I-shaped Steel Reinforced Concrete (SRC) Beams

Experimental investigation and analytical model for the shear behavior of composite beams with prefabricated U‐shaped RPC permanent formworks

Experimental study on flexural behavior of partially precast high-strength steel reinforced ultra-high performance concrete beam

Experimental study of an innovative steel-concrete composite beam under hogging moment

Experimental Study on Shear Behavior of Reinforced-Concrete Members Fully Wrapped with Large Rupture-Strain Frp Composites

Experimental and numerical study on the shear behavior of hybrid BFRP/steel RC beams without shear reinforcement

Shear performances of reinforced ultra-high performance concrete short beams

Ductility and Ultimate Capacity of Prestressed Steel Reinforced Concrete Beams

Experimental investigation and numerical analysis of RC beams shear strengthened with FRP/ECC composite layer

Experimental. Research On Shear Behaviors Of Reinforced Strain-Hardening Cementitious Composite (Rshcc) Beam

Experimental study and analysis of RC beams shear strengthened with FRP/SMA composites

Dynamic Behavior of a Precast and Partial Steel Joint under Various Shear Span-to-Depth Ratios

EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF COMPOSITE REINFORCEMENTCONCRETE PREFABRICATED SQUARE PILES

Shear bearing capacity of steel-reinforced recycled aggregate concrete short beams based on modified compression field theory

Experimental Study on Shear Performance of Post-Tensioning Prestressed Concrete Beams with Locally Corroded Steel Strands