Abstract:An innovative form of steel-concrete composite beam, the steel-coarse aggregate reactive powder concrete (CA-RPC) composite beam with uplift-restricted and slip-permitted (URSP) connectors, is introduced in this paper. The aim is to enhance the cracking resistance under negative bending moments, which is a difficult problem for traditional composite beams, and to make the cost lower than using ordinary reactive powder concrete (RPC). An experimental investigation of the behavior of six specimens of simply supported steel-CA-RPC composite beams with URSP connectors under negative bending moments is presented in this paper. The test results validated that the cracking load of steel-CA-RPC composite beams could be approximately three times that of the ordinary steel-concrete composite beams while the bearing capacity and stiffness are almost the same. A numerical model, using the concrete damaged plasticity (CDP) model to simulate the behavior of the CA-RPC material, was proposed and successfully calculated the overall load-displacement relationship of the composite beams with sufficient accuracy compared with the experimental results, and the distribution of cracks and the failure mode of the beams could also be captured by this model. Furthermore, a parametric analysis was carried out to find out how the application of prestress, CA-RPC, and URSP connectors could affect the cracking resistance of the composite beams, and the results indicated that using CA-RPC and prestress made the main contributions and that the usage of URSP could boost the effect of the other two factors. The plastic resistance moment of the beams was also compared with the calculation results using the methods introduced in Eurocode 4, and it was proved that the calculation results were lower than the experimental results by approximately 10%, which meant that the method was reliable for this kind of composite beam.

Experimental investigation and analytical model for the shear behavior of composite beams with prefabricated U‐shaped RPC permanent formworks

Shear Design Method for Non-Prismatic Concrete Beams Reinforced Using W-FRP

Experimental Research on Novel RPC-steel Composite Connections for Prefabricated Glubam-Concrete Composite Beams

Experimental Research the Shearing Performance of Grading-Fiber Reinforced Reactive Powder Concrete

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Experimental investigation and numerical analysis of RC beams shear strengthened with FRP/ECC composite layer

Experimental study and analysis of RC beams shear strengthened with FRP/SMA composites

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Experimental study on RC beams shear‐strengthened with composite polymer mortar and steel strands wire mesh

Experimental investigation on shear performance of RC T-beams strengthened with hybrid bonded CFRP strips

Experimental investigation on shear behavior of GFRP-concrete hybrid beams

Experimental and Numerical Study on the Performance of Steel-Coarse Aggregate Reactive Powder Concrete Composite Beams with Uplift-Restricted and Slip-Permitted Connectors under Negative Bending Moment

Shear performance of deep partially precast high-strength steel reinforced UHPC T-beam: Experimental study and a novel shear model

Experimental and Analytical Studies on Shear Behaviors of FRP-concrete Composite Sections

Shear resistance and calculation method of GFRP-reinforced concrete beams with CFRP mesh fabric as shear reinforcement

Theoretical and experimental study on shear behavior of hybrid fiber reinforced concrete deep beam

Shear behavior and strength prediction of HFRP reinforced concrete beams without stirrups

Experimental and numerical study on the shear behavior of hybrid BFRP/steel RC beams without shear reinforcement

Experimental Study on Shear Behaviors of Partial Precast Steel Reinforced Concrete Beams

FINITE ELEMENT ANALYSIS OF SHEAR BEHAVIOR OF RC BEAMS STRENGTHENED WITH U-SHAPED FRP SHEETS