Abstract:In this article, a low-energy chirp-pulsed radar thermography (CP-RT) is used to detect the subsurface delamination of carbon fiber reinforced polymer (CFRP) composite as nondestructive testing and evaluation (NDT&E) techniques. The CFRP specimen with artificial flat-bottom holes (FBHs) is prepared for NDTandE by chirp-pulsed radar thermography. Two lasers are employed to be external excitation heat sources. The laser intensities are modulated according to a chirp-pulsed radar signal that combines linear frequency modulation and pulse excitation, and the temperature rise is controlled within 2 °C in the experiment. The thermal-wave response signal is processed by a series of different postprocessing characteristic extraction algorithms. These algorithms include time–frequency algorithms [crosscorrelation algorithm (CC), fast Fourier transform (FFT), and dual-orthogonal demodulation algorithm (DOD)] and statistical analysis approaches [principal component analysis (PCA) and PCA-based reconstructed independent component analysis (PCA-RICA)]. The signal-to-noise ratio (SNR) of defects is employed to evaluate the defect detectability for different size defects by different postprocessing algorithms. A three-dimensional (3-D) tomography method based on the FFT phase characteristic is proposed. A truncated-correlation photothermal tomography based on DOD is also introduced to enable the 3-D tomography of CFRP specimen. The FFT phase presents a relatively high SNR and has good correlation with the depth of the defect. The FFT-based CP-RT has the potential to provide a rapid NDT&E and 3-D tomography approach for CFRP with subsurface defects under the low-energy excitation condition.

A Study Of Detection Of Internal Defects In Cfrp Using Different Modes Of Planar Laser

Ultrasonic Inspection Of Localized Defects In Low-Porosity Cfrp

Defect Detection Method for CFRP Based on Line Laser Thermography

Intralaminar Crack Detection for Carbon Fiber Reinforced Polymers Based on Laser-Line Thermography

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

Using Differential Spread Laser Infrared Thermography to Detect Delamination and Impact Damage in CFRP

A portable fiber laser thermography system with beam homogenizing for CFRP inspection

Inspection Of Defects In Cfrp-Foam Layered Structure Composite Plates Of Aerospace Materials Using Lock-In Thermography

Research on CFRP Materials Nondestructive Testing by IR Lock-in Thermography

Study on Lock-in Thermography Defect Detectability for Carbon-Fiber-Reinforced Polymer (CFRP) Sheet with Subsurface Defects

Characterization and depth detection of internal delamination defects in CFRP based on line laser scanning infrared thermography

Detection and identification of delamination defects in CFRP laminates using nonlinear frequency-modulated infrared thermal wave testing technology

Ultrasonic Testing of Carbon Fiber-Reinforced Polymer Composites

Non-destructive Testing of Airfoil Based on Infrared Lock-in Thermography

The Inspection of CFRP Laminate with Subsurface Defects by Laser Arrays Scanning Thermography (Lasst)

Study on Probability of Detection for CFRP Laminate Defect Using Infrared Thermal Wave Radar Imaging

Joint Scanning Laser Thermography Defect Detection Method for Carbon Fiber Reinforced Polymer

Quantitative Test of Delamination Defects in CFRP with Surface Interference by Laser Thermography

Low-velocity Impact Damage Detection in CFRP Composites by Applying Long Pulsed Thermography Based on Post-Processing Techniques

The Feature Recognition of CFRP Subsurface Defects Using Low-Energy Chirp-Pulsed Radar Thermography

Experimental study on infrared phase-locked thermal imaging inspection of carbon fiber reinforced polymer laminates