Abstract:In this article, a low-energy chirp-pulsed radar thermography (CP-RT) is used to detect the subsurface delamination of carbon fiber reinforced polymer (CFRP) composite as nondestructive testing and evaluation (NDT&E) techniques. The CFRP specimen with artificial flat-bottom holes (FBHs) is prepared for NDTandE by chirp-pulsed radar thermography. Two lasers are employed to be external excitation heat sources. The laser intensities are modulated according to a chirp-pulsed radar signal that combines linear frequency modulation and pulse excitation, and the temperature rise is controlled within 2 °C in the experiment. The thermal-wave response signal is processed by a series of different postprocessing characteristic extraction algorithms. These algorithms include time–frequency algorithms [crosscorrelation algorithm (CC), fast Fourier transform (FFT), and dual-orthogonal demodulation algorithm (DOD)] and statistical analysis approaches [principal component analysis (PCA) and PCA-based reconstructed independent component analysis (PCA-RICA)]. The signal-to-noise ratio (SNR) of defects is employed to evaluate the defect detectability for different size defects by different postprocessing algorithms. A three-dimensional (3-D) tomography method based on the FFT phase characteristic is proposed. A truncated-correlation photothermal tomography based on DOD is also introduced to enable the 3-D tomography of CFRP specimen. The FFT phase presents a relatively high SNR and has good correlation with the depth of the defect. The FFT-based CP-RT has the potential to provide a rapid NDT&E and 3-D tomography approach for CFRP with subsurface defects under the low-energy excitation condition.

The Inspection of CFRP Laminate with Subsurface Defects by Laser Arrays Scanning Thermography (Lasst)

Ultrasonic Inspection Of Localized Defects In Low-Porosity Cfrp

Adaptive Total Focusing Method for Ultrasonic Full-Matrix Imaging of Anisotropic CFRP Laminates

Joint Scanning Laser Thermography Defect Detection Method for Carbon Fiber Reinforced Polymer

A Nonlinear Method for Characterizing Discrete Defects in Thick Multilayer Composites

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

A Study of Inner Crack Testing with the Laser Phased Array Method.

The Feature Recognition of CFRP Subsurface Defects Using Low-Energy Chirp-Pulsed Radar Thermography

3D photothermal reconstruction of subsurface defects in notched multidirectional CFRP laminates due to tensile fatigue loading

[Significance of fine needle biopsy in the diagnosis of breast cancer. 2: Accuracy and effectiveness within the scope of triple diagnosis].

Reconstruction of Impact Damage in CFRP Laminate Based on Infrared Thermography

Automatic Detection of CFRP Subsurface Defects via Thermal Signals in Long Pulse and Lock-In Thermography

Characterization and depth detection of internal delamination defects in CFRP based on line laser scanning infrared thermography

Automated ultrasonic testing for near-surface flaws in CFRP

Detection and identification of delamination defects in CFRP laminates using nonlinear frequency-modulated infrared thermal wave testing technology

Nondestructive detection of CFRP subsurface defects using transient lock-in thermography

Quantitative non-destructive evaluation of CFRP delamination defect using laser induced chirp-pulsed radar photothermal tomography

Spatio-Temporal 3-D Residual Networks for Simultaneous Detection and Depth Estimation of CFRP Subsurface Defects in Lock-In Thermography

Adaptive ultrasonic full-matrix imaging of internal defects in CFRP laminates with arbitrary stacking sequences

A portable fiber laser thermography system with beam homogenizing for CFRP inspection

Detection and quantification of corrosion defects in CFRP-strengthened steel structures based on low-power vibrothermography