Abstract:In this article, a low-energy chirp-pulsed radar thermography (CP-RT) is used to detect the subsurface delamination of carbon fiber reinforced polymer (CFRP) composite as nondestructive testing and evaluation (NDT&E) techniques. The CFRP specimen with artificial flat-bottom holes (FBHs) is prepared for NDTandE by chirp-pulsed radar thermography. Two lasers are employed to be external excitation heat sources. The laser intensities are modulated according to a chirp-pulsed radar signal that combines linear frequency modulation and pulse excitation, and the temperature rise is controlled within 2 °C in the experiment. The thermal-wave response signal is processed by a series of different postprocessing characteristic extraction algorithms. These algorithms include time–frequency algorithms [crosscorrelation algorithm (CC), fast Fourier transform (FFT), and dual-orthogonal demodulation algorithm (DOD)] and statistical analysis approaches [principal component analysis (PCA) and PCA-based reconstructed independent component analysis (PCA-RICA)]. The signal-to-noise ratio (SNR) of defects is employed to evaluate the defect detectability for different size defects by different postprocessing algorithms. A three-dimensional (3-D) tomography method based on the FFT phase characteristic is proposed. A truncated-correlation photothermal tomography based on DOD is also introduced to enable the 3-D tomography of CFRP specimen. The FFT phase presents a relatively high SNR and has good correlation with the depth of the defect. The FFT-based CP-RT has the potential to provide a rapid NDT&E and 3-D tomography approach for CFRP with subsurface defects under the low-energy excitation condition.

Automatic Detection of CFRP Subsurface Defects via Thermal Signals in Long Pulse and Lock-In Thermography

Spatio-Temporal 3-D Residual Networks for Simultaneous Detection and Depth Estimation of CFRP Subsurface Defects in Lock-In Thermography

Ultrasonic Inspection Of Localized Defects In Low-Porosity Cfrp

Characterization and depth detection of internal delamination defects in CFRP based on line laser scanning infrared thermography

The Feature Recognition of CFRP Subsurface Defects Using Low-Energy Chirp-Pulsed Radar Thermography

Surface defect detection of CFRP materials based on infrared thermography and Attention U-Net algorithm

Automatic Defect Classification for Infrared Thermography in CFRP based on Deep Learning Dense Convolutional Neural Network

Low-velocity Impact Damage Detection in CFRP Composites by Applying Long Pulsed Thermography Based on Post-Processing Techniques

Defect Depth Retrieval Method Based on Nonlinear Transformation for Pulsed Thermographic Inspection

Defect Detection in CFRP Structures Using Pulsed Thermographic Data Enhanced by Penalized Least Squares Methods

Defect Detection Method for CFRP Based on Line Laser Thermography

Multi-frequency Fused Lock-in Thermography in Detecting Defects at Different Depths

Two-stream Convolutional Neural Network for Non-Destructive Subsurface Defect Detection Via Similarity Comparison of Lock-in Thermography Signals

Optimization of Thermal-Wave Radar Thermography by Transverse Heat Flow Suppression Technique for Accurate Defect Detection of CFRP Laminates

Detection and identification of delamination defects in CFRP laminates using nonlinear frequency-modulated infrared thermal wave testing technology

Thermographic clustering analysis for defect detection in CFRP structures

Enhanced Defect Detection in Carbon Fiber Reinforced Polymer Composites via Generative Kernel Principal Component Thermography

Research on CFRP Materials Nondestructive Testing by IR Lock-in Thermography

Inverse Heat Transfer Approach for Nondestructive Estimation the Size and Depth of Subsurface Defects of CFRP Composite Using Lock-in Thermography

Automatic Seeded Region Growing for Thermography Debonding Detection of CFRP

Deep Autoencoder Thermography for Defect Detection of Carbon Fiber Composites