Abstract:Cross-linking of poly(vinyl alcohol) (PVA) creates a three-dimensional network by bonding adjacent polymer chains. The cross-linked structure, upon immersion in water, turns into a hydrogel, which exhibits unique absorption properties due to the presence of hydrophilic groups within the PVA polymer chains and, simultaneously, ceases to be soluble in water. The properties of PVA can be adjusted by chemical modification or blending with other substances, such as polymers, e.g., conductive poly[3-(potassium-5-butanoate)thiophene-2,5-diyl] (P3KBT). In this work, PVA-based conductive semi-interpenetrating polymer networks (semi-IPNs) are successfully fabricated. The systems are obtained as a result of electrospinning of PVA/P3KBT precursor solutions with different polymer concentrations and then cross-linking using “green”, environmentally safe methods. One approach consists of thermal treatment (H), while the second approach combines stabilization with ethanol and heating (E). The comprehensive characterization allows to evaluate the correlation between the cross-linking methods and properties of nanofibrous hydrogels. While both methods are successful, the cross-linking density is higher in the thermally cross-linked samples, resulting in lower conductivity and swelling ratio compared to the E-treated samples. Moreover, the H-cross-linked systems have better mechanical propertieslower stiffness and greater tensile strength. All the tested systems are biocompatible, and interestingly, due to the presence of P3KBT, they show photoresponsivity to solar radiation generated by the simulator. The results indicate that both methods of PVA cross-linking are highly effective and can be applied to a specific system depending on the target, e.g., biomedical or electronic applications.

Fabrication and Characterization of in Situ Cross-Linked Electrospun Poly (vinyl Alcohol)/phase Change Material Nanofibers

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Morphology, thermal and mechanical properties of electrospun polyvinylidene/polyethylene glycol composite nanofibers as form-stabilized phase change materials

Hydrophilic Nanofiber of Bacterial Cellulose Guided the Changes in the Micro-Structure and Mechanical Properties of Nf-Bc/pva Composites Hydrogels

Electrospun Polyethylene Glycol/Polyvinyl Alcohol Composite Nanofibrous Membranes as Shape-Stabilized Solid–Solid Phase Change Materials

Preparation and Performance of Novel Polyvinylpyrrolidone/polyethylene Glycol Phase Change Materials Composite Fibers by Centrifugal Spinning

A novel shape-stabilized PCM: Electrospun ultrafine fibers based on lauric acid/polyethylene terephthalate composite

Optimization design and properties of PVA/GEL nanofibers

Microstructure and Thermal and Tensile Properties of Poly(vinyl Alcohol) Nanocomposite Films Reinforced by Polyacrylamide Grafted Cellulose Nanocrystals

Flexible Polyethylene Glycol/polyvinylpyrrolidone Composite Phase Change Fibres: Preparation, Characterization, and Thermal Conductivity Enhancement

Polyacrylonitrile/polyethylene Glycol Phase-Change Material Fibres Prepared with Hybrid Polymer Blends and Nano-Sic Fillers Via Centrifugal Spinning

Electrospun Polyvinyl Alcohol/waterborne Polyurethane Composite Nanofibers Involving Cellulose Nanofibers

Processing and Characterisation of Hybrid Aramid Fabrics Reinforced with Cross-linked Electrospun PVB Composite Nanofibres

Covalently Cross-Linked Ultrastrong SiO2-loaded Polyvinyl Alcohol Fibers Via Microfluidic Spinning

Electrospun Polyvinyl Alcohol/Halloysite Nanotubes Composite Nanofibers

The effects of electrospinning parameters on coaxial polyacrylonitrile/polyurethane nanofibers: Morphology and water vapour transmission rate

Fabrication and characterization of Polyvinylidene fluoride and Myristic acid-Tetradecanol eutectic composite Nanofibers by electrospinning

Electrospun Poly(vinyl alcohol)-Based Conductive Semi-interpenetrating Polymer Network Fibrous Hydrogel: A Toolbox for Optimal Cross-Linking

Electrospun phase change fibers based on polyethylene glycol/cellulose acetate blends

Cellulose nanofibers reinforced electrospun nano-fiber mats containing poly(vinyl alcohol)and waterborne polyurethane

Mechanical Properties and in Vitro Degradation of Electrospun Bio-Nanocomposite Mats from PLA and Cellulose Nanocrystals