Abstract:Fiber-reinforced polymer matrix composites are widely used in many structural applications thanks to their exceptional properties. In recent years, the use of electrospinning nanofibers with unique properties as reinforcement agents has attracted a great deal of attention in improving the performance of these composites. Although there are many promising studies on this subject in the literature, there are still many issues that need to be investigated. In this study, an experimental research reporting on the production and mechanical properties of two-phase polymer matrix composites reinforced with various types of thermoplastic nanofibers is presented. Nanofiber mats were produced from N66, PAN, PVA, and PVC polymers by electrospinning technique. Composites were obtained by embedding these nanofibers into epoxy resin by using vacuum infusion process. Mechanical properties of the composites were determined by performing tensile tests and the results were compared. The morphologies of nanofibers and the fracture surfaces of the composites were examined with SEM. Finally, statistical evaluations were carried out using mechanical data. According to tensile test results, the best ultimate tensile strength of 38.04 ± 3.7 MPa, elongation of 2.46 ± 0.4% and toughness of 532 ± 137 kJ/m3 were obtained from N66 nanofiber composite, while PVA nanofiber composite was the most favorable in terms of Young's modulus (2.40 GPa). It was observed that the polymer type significantly affected the performance of the composite. In addition to the best mechanical properties, N66 composite was found to be more stable and reproducible than other specimens. Due to the good impregnation of nanofibers, it was conclusively determined that the use of vacuum infusion process is suitable for the production of these materials.

Processing and Characterisation of Hybrid Aramid Fabrics Reinforced with Cross-linked Electrospun PVB Composite Nanofibres

Fabrication and Characterization of in Situ Cross-Linked Electrospun Poly (vinyl Alcohol)/phase Change Material Nanofibers

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Electrospun Poly(vinyl alcohol)-Based Conductive Semi-interpenetrating Polymer Network Fibrous Hydrogel: A Toolbox for Optimal Cross-Linking

Impact of weave architecture on the mechanical performance of carbon-aramid/PVB hybrid composites

Mechanical and Thermal Characterization of Bamboo and Interlaminar Hybrid Bamboo/Synthetic Fibre-Reinforced Epoxy Composites

Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites

Electrospun Polyvinyl Alcohol/Halloysite Nanotubes Composite Nanofibers

Fabrication and properties of clay-supported carbon nanotube/poly (vinyl alcohol) nanocomposites

Determination of mechanical properties of polymer matrix composites reinforced with electrospinning N66, PAN, PVA and PVC nanofibers: A comparative study

Natural fibers woven fabric reinforced hydrogel composites for enhanced mechanical properties

A Novel Method to Enhance the Mechanical Properties of Polyacrylonitrile Nanofiber Mats: An Experimental and Numerical Investigation

The effects of functionalization on the thermal and tribo‐mechanical behaviors of neat and grafted polyethylene nanocomposites

Optimization design and properties of PVA/GEL nanofibers

Synthesis of Composite Hydrogel Made of Woven Fabrics Stitched with PVA Yarn

Investigations on the development of impact-resistant thermoplastic fibre hybrid composites from glass and steel fibre

Effect of MWCNT Anchoring to Para-Aramid Fiber Surface on the Thermal, Mechanical, and Impact Properties of Para-Aramid Fabric-Reinforced Vinyl Ester Composites

Effect of Nanosilica on Mechanical Properties and Microstructure of PVA Fiber-Reinforced Geopolymer Composite (PVA-FRGC)

Development of reinforced composite materials with a nanoporous textile substrate and a brush-structured polymer interfacial layer

The Mechanical Properties of Nanocomposites Reinforced with PA6 Electrospun Nanofibers

The effects of electrospinning parameters on coaxial polyacrylonitrile/polyurethane nanofibers: Morphology and water vapour transmission rate